Panasonic TU-HDS20 User Manual

YOU MUST PERFORM THE AUTOMATIC CHANNEL PROGRAMMING BEFORE
MANUALLY ADDING AND DELETING CHANNELS BECAUSE OF THE DIGITAL
TUNING SYSTEM USED BY THE HDTV Digital Receiver.  THIS METHOD WILL
ENSURE THAT EVERY AVAILABLE CHANNEL IS CAPTURED AND STORED INTO
MEMORY.
Automatic Channel Programming
The HDTV Digital Receiver will scan for all available channels and store them in
memory.  The scan will normally take several minutes to complete.  
Procedure

H In SET UP Menu, select Ant Setup to choose AUTO Scan to automatically scan and store

all channels with a signal.

H Press the   arrow to select AUTO.
H Press the ACTION button to start the auto scan.
H Press the ACTION button to cancel the auto scan or exit back to SET UP Menu after the

auto scan is complete.

H Press the   arrow once to exit back to Roller Guide.

Manual Channel Programming
After programming all available channels, you can use the MANUAL feature to
selectively add or delete channels.
Procedure

H In SET UP Menu, select Ant Setup to choose Add/Del Ch to manually add or delete

channels.

H Press the    to enter sub-menu.

•

Use the  ,   arrow buttons and numeric keypad to select a channel.

•

Use the 

 and 

 arrow buttons to delete or add channels.

H Press the ACTION button to exit back to Ant Setup Menu.
H Press the   arrow once to exit back to Setup Menu.

The AUTO feature must be selected first to ensure that all
available channels are captured and stored into memory.