Quantum INFMANU4169 User Manual

Litestream Junior

www.pridemobility.com 

21

I V .   C O M F O R T   A D J U S T M E N T S

1.  Remove the depth adjustment screws that attach

the back cane to the side frame on both sides of the

wheelchair. See figure 15.

2. Position the back canes so that the desired depth is

achieved. 

3. Reinstall the depth adjustment screws screws to

secure the back canes to the side frame on both

sides of the wheelchair.

If your wheelchair is set up in reverse configuration, it

will also be equipped with anti-tip wheels. Anti-tip

wheels are an integral and important safety feature of

your wheelchair. They are factory set to between 0.75-

2 in. (2-5 cm), but may require adjustment to accom-

modate depth adjustment and center of gravity.

PROHIBITED! Pride recommends not to

remove the anti-tip wheels or modify

the wheelchair in any way that is not

authorized by Pride.

WARNING! The anti-tip wheels should

only be adjusted by a Quantum Rehab

Provider or a qualified technician.

1.  Push the button on the anti-tip wheel and move the

anti-tip wheel up or down to unlock it. See figure 16.

2. Adjust the anti-tip wheel to the desired position

while aligning the anti-tip wheel with the

adjustment hole. 

3. Ensure that the button locks into place. You will

hear a click when the anti-tip wheel is locked into

place. 

4. After installing or adjusting the anti-tip wheels,

push and pull on both anti-tip wheels to ensure they

are properly engaged.

5. Repeat for the other side.