Quantum 1121 3MP User Manual

12

www.pridemobility.com

Quantum 1121 Series

Positioning Belts
Your Quantum Rehab Provider, therapist(s), and other healthcare professionals are responsible for determining

your requirement for a positioning belt in order to operate your power chair safely.

WARNING! If you require a positioning belt to safely operate your power chair, make sure it is

fastened securely in order to reduce the possibility of a fall from the power chair. 

WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle. Nor is

your power chair suitable for use as a seat in any vehicle. Anyone traveling in a vehicle should

be properly belted into seats approved by the vehicle manufacturer.

Batteries
In addition to following the warnings below, be sure to comply with all other battery handling information. For

more information about your power chair’s batteries, see VI. “Batteries and Charging.”

WARNING! Battery posts, terminals, and related accessories contain lead and lead

compounds. Wear goggles and gloves when handling batteries and wash hands after

handling.

WARNING! Power chair batteries are heavy. See specifications table. If you are

unable to lift that much weight, be sure to get help. Use proper lifting techniques and

avoid lifting beyond your capacity.

WARNING! Always protect the batteries from freezing and never charge a frozen

battery. Charging a frozen battery may result in damage to the battery.

WARNING! Connect your battery harnesses in the proper manner. RED (+) cables

must be connected to positive (+) battery terminals/posts. BLACK (-) cables must be

connected to negative (-) battery terminals/posts. Protective caps should be installed

over all battery terminals. REPLACE cables immediately if damaged.

WARNING! Do not attempt to lift or move a power chair by any of its removable parts, including

the armrests, seat, front riggings, controller, and shrouds.

WARNING! If you anticipate being seated in a stationary position for an extended period of time,

turn off the power. This will prevent unexpected motion from inadvertent joystick contact. This

will also eliminate the possibility of unintended chair movement from electromagnetic (EM)

sources.

Reaching and Bending
Never reach, lean, or bend while driving your power chair. If it is absolutely necessary to reach, lean, or bend

while seated on your power chair, it is important to maintain a stable center of gravity and keep the power chair

from tipping. Pride recommends that the power chair user determine his/her personal limitations and practice

bending and reaching in the presence of a qualified healthcare professional. 

WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the floor by

reaching down between your knees or if you have to reach over the back of the seat. Movements

such as these may change your center of gravity and the weight distribution of the power chair,

possibly causing your power chair to tip.

WARNING! Keep your hands away from the tires when driving. Be aware that loose fitting

clothing can become caught in drive tires.

I I .   S A F E T Y