Samsung DVD-V70 User Manual

Using the G-CODE Feature

★

(DVD-V80/DVD-V85 Only)

Timer Method

If you want to set
the timer program,
press the key.

G-Code

Code

Code : 0 - 9

Correct :

Standard

G-Code

Timer Method

OPEN/CLOSE

STANDBY/ON

★

(DVD-V70)

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.

Switch on the television.

To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).

Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:

The DVD-VCR is switched on automatically.

Select:

◆

The station to be recorded using the PROG ( or ) buttons
or

◆

The LINE1, LINE2 source using the INPUT SEL. button for a
satellite tuner or external video source

Result:

The channel number is displayed and the programme
can be seen on the television.

Select the recording speed by pressing the SPEED button as
many times as required (see page 32).

Hold the REC button (

●

) down for a while to start recording.

Result:

The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 42).

Press the REC button (

●

) several times to increase the

recording time in:

◆

30-minute intervals up to four hours

◆

1-hour intervals up to nine hours

Result:

The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically and power off.

If you wish to cancel the recording before the end, press
STANDBY/ON.

☛

If the end of the tape is reached while recording:

◆

The recording stops and power off.

☛

This function is not available in DVD recording

EJECT

STANDBY/ON

DVD

PROG

VCR

LINE2

LENGTH 2:30

SET LENGTH :

PRESS

REC

●

Before presetting your DVD-VCR:

◆ Switch on both the television and your DVD-VCR

◆ Check that the date and time are correct

◆ Insert the cassette on which the programme is to be

recorded (safety tab intact)

Up to six programmes can be preset.

Press the TIMER button.
Result:

The

TIMER METHOD

is displayed.

Press the corresponding

❷

buttons, until the

G-Code

option

is selected.

Press the

❿

button to select

G-Code

Result:

A message is displayed to allow you to enter the
G-Code code.

☛

If all six programmes have been set, the message

Timer

is Full

is displayed. Refer to page 38 if you wish to

cancel a preset recording.

Press the numeric buttons to enter the code opposite the pro
gramme that you wish to record in your television magazine.

➢

If you wish to correct the G-Code code that you are
entering:

◆

Press the

➛

button until the digit to be corrected is

cleared

◆

Enter the correct digit

Press the OK button.
Result:

The information concerning the programme is displayed.

☛

When using the G-Code function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the

❷

buttons. Refer to the following page if:

◆

The programme number or times flash

◆

You wish to modify the programme

If the programme and times are correct, press the RETURN button.

Press the STANDBY/ON button to activate the timer.

Refer to page 38 if you wish to:

◆

Check that your VCR has been programmed correctly

◆

Cancel a preset recording

☛

The numbers next to each TV programme listing are

G-CODE code numbers, which allow you to programme

your videorecorder instantly with the remote control. Tap

in the G-CODE code for the programme you wish to

record.

™ G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is

manufactured under licence from Gemstar Development Corporation.

VCR