Panasonic NV-SJ400A User Manual
27
Adv
anced Operations
Copying
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of previous one.
other recordings or video sources.
A new scene can be added to the end of previous one.
Preparations
¡ Connect a video movie camera or another VCR to this VCR
¡ Connect a video movie camera or another VCR to this VCR
as shown.
≥
Display the VCR picture on the TV.
¡ Insert the cassette on which the copying is to be
performed, and make sure that its erasure prevention tab is
not broken out.
not broken out.
¡ Select the audio source required by pressing the INPUT
SELECT button Q to set A1 or A2.
A1: Through the AV1 (AUDIO IN/VIDEO IN) sockets.
A2: Through the AV2 (AUDIO IN/VIDEO IN) sockets on
A2: Through the AV2 (AUDIO IN/VIDEO IN) sockets on
front panel.
Recording VCR
Operations
1
1
Press the Play button I to start playback.
2
At the point where you want to join a new scene, press
the Pause/Slow button 7 to put it in the still playback
mode.
the Pause/Slow button 7 to put it in the still playback
mode.
3
Press the REC button K to put it in the recording pause
mode.
mode.
4
Start playback on the source unit and search for the
point from which you want to record (copy) onto this
VCR.
point from which you want to record (copy) onto this
VCR.
5
When that point is reached, press the Pause/Slow
button 7 again to start recording the new picture and
sound from the playback unit.
button 7 again to start recording the new picture and
sound from the playback unit.
6
To record (copy) additional scenes, press the Pause/
Slow button 7 to put this VCR in the recording pause
mode and then perform above steps 4 and 5 again.
Slow button 7 to put this VCR in the recording pause
mode and then perform above steps 4 and 5 again.
7
At the point where you want to stop recording, press the
Stop button 9 to finish recording.
Stop button 9 to finish recording.
Notes:
≥
≥
If you leave the VCR in the recording pause mode for more
than 5 minutes in step 3 or 6, the VCR automatically
switches over to the stop mode to protect the video heads.
than 5 minutes in step 3 or 6, the VCR automatically
switches over to the stop mode to protect the video heads.
¡ If “DIRECT REC” is set to “ON”, connect with AV2 sockets
and select A2.
Making a Copy
POWER Í/I
2
PULL-OPEN
DIRECT REC
RF
OUT
IN
VIDEO
IN (AV1) OUT
AUDIO
Other VCR or
Video movie camera
Video movie camera
AV2 (AUDIO IN\ / VIDEO IN [)
AV1 (AUDIO IN c / VIDEO IN a)