Anritsu MG3641A User Manual

SECTION 6   GPIB

6-1

6.1

Outline of GPIB

6.1.1

Overview

The MG3641A/MG3642A synthesized signal generator can automate the measurement by a combination with an

external controller and other instruments.

This device conforms to the institute of electrical and electric engineers (IEEE) std 488.1-1987.  The software

standard conforms to IEEE488.2 and standard commands for programmable instruments (SCPI).

6.1.2

GPIB functions

This device has the following four GPIB functions:

• Control of all the functions excluding the [Stby/On] switch and [Local] key

• Reading all setting conditions

• Setting a GPIB address from the panel

• Synchronous control of frequency and level in only mode