Panasonic PV-V4612 User Manual

• T
a

pe Oper

ation

Tape Operation

- 7 -

Tape Operation

- 6 -

•

MTS Br

oadcast •

VHS Hi-F

i Ster

eo System •

imer Recording Using

VCR Plus+ System •

pe Operation

- 5 -

- 4 -

Advanced Connections

• Advanced Connections • Multi-Brand Contr

ol F

atur

- 3 -

Multi-Brand Control Feature

- 2 -

Playback

helps you locate certain parts of

prerecorded movies (rented or purchased).
The feature works in two ways.
• You can go to the beginning of the movie.
• You can skip from one preview to the next.

works only on tapes recorded in

SP speed with the record tab removed.

Insert a tape without record tab.

Press SEARCH/ M/A
SKIP to display
SEARCH.

Select “GO TO START MOVIE,” if you want to
advance directly to beginning of the movie.

➛ continue with step 4.
Select “GO TO PREVIEW,” if you want to view
the first (next) preview.

➛ go to “To Search for Preview” at right.

Press SEARCH/ M/A
SKIP twice to select
MOVIE and press
to select GO TO
START MOVIE or GO
TO PREVIEW.

Press FF to start
searching.

• To cancel, press

STOP.

Press PLAY to start
playback.

When the movie is found...

• To cancel, press

STOP.

Start preview searching.

When a preview is detected, VCR
will start playback.

To Search for Preview.

Start next preview searching.

1) In step 3 at left, select Go To PREVIEW.

2) Press FF.

Press SEARCH/ M/A SKIP.

• To cancel, press STOP.

You can override the operation of

SEARCH FOR PREVIEWS

mode by pressing SEARCH/ M/A SKIP during
tape searching.

works by

searching the tape past each preview and then
reversing back to the start of the detected
preview. While the tape is reversing back, if
SEARCH/ M/A SKIP is pressed,

will begin searching for the

next preview. While searching for the next
preview, if you see the start of a preview which
you wish to watch, press SEARCH/ M/A SKIP
and

will immediately reverse

back to the start of that preview, instead of
searching further past the preview start point.
Once the VCR is playing a preview, press
SEARCH/ M/A SKIP to advance to the next
preview, long commercial or the start of the
movie (whichever is next).

• If you want to playback, press PLAY.

SEARCH
INDEX PROG. END MOVIE

ENTER INDEX NUMBER :1
USING 1- 9 KEYS

FORWARD SEARCH :FF
REVERSE SEARCH :REW
NEXT :SEARCH M/A SK I P
EXIT :STOP

SEARCH
INDEX PROG. END MOVIE

GO TO START MOVIE

GO TO PREVIEW

SEARCH START : FF
SELECT :

EXIT : SEARCH M/A SK I P

SEARCH
INDEX PROG. END MOVIE

SEARCHING FOR START
OF MOVIE

CANCEL : STOP

SEARCH
INDEX PROG. END MOVIE

THE MOV I E I S READY

START : PLAY

CANCEL : STOP

Search System

For each recording, an invisible index mark is placed on the tape. A program index and
information are also included for timer recordings. These marks are used to access or
scan recordings.

Index Search

Program End Search

Press SEARCH/ M/A
SKIP to display
SEARCH in Stop or Play
mode, and then press
NUMBER keys to select
recording number.
• To calculate number,

see below.

Press FF or REW on
the remote to start
search.
Play begins at search
end. To search forward
or back 1 index, press
FF or REW on the
remote or VCR while
screen left is displayed
(10 sec.).
• To cancel, press

STOP or PLAY.

INDEX SEARCH

FORWARD SEARCH :FF
REVERSE SEARCH :REW

SEARCH
INDEX PROG. END MOVIE

ENTER INDEX NUMBER :1
USING 1- 9 KEYS

FORWARD SEARCH :FF
REVERSE SEARCH :REW
NEXT :SEARCH M/A SK I P
EXIT :STOP

To Calculate Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

NOTE: indicates start points of each recording.

• If Index Search is started very close to an

index mark, that index mark may not be
counted in the search.

*Important:
If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.

Note

Locates end point of recording for continuity.

Examples of Program End Search.

Press FF on the
remote to start
PROGRAM END
SEARCH.

Press SEARCH/ M/A SKIP twice to
display SEARCH in Stop or Play mode.

• To cancel, press

STOP or PLAY.

SEARCH
INDEX PROG. END MOVIE

SEARCH START :FF

NEXT :SEARCH M/A SK I P
EXIT :STOP

Examples of Program End Search.

➛ search continues 7 sec. past end point,

➛ tape rewinds to 10 sec. before end point,

➛ tape plays to end point and stops.

Upon locating end point,

Fig. 1

End Point

Program 2 or BLANK

Program 1

the current tape position
Press SEARCH button

INDEX

Fig. 2

End Point

Program 2

Program 1

the current tape position
Press SEARCH button

INDEX

BLANK

Fig. 3

End Point

Program 2

Program 1

the current tape position
Press SEARCH button

BLANK

INDEX

If search
exceeds a few
seconds in
BLANK area.

• If Program End Search is started very close

to an index mark, that mark may be skipped
over.

• To cancel, press PLAY or STOP.

Notes

With C/A RECORD: ON, the VCR auto rewinds
after a recording is made and marks start and end
points of all detected commercial blocks.
After marking, the tape is returned to end of
recording. Commercials are not erased.

marks start and end points of

commercials within recordings over 15 minutes
long. The VCR automatically advances through
marked commercials at high speed. Or, you may
set to manual. Because stations broadcast
differently, the effectiveness of this feature may
vary. See bottom of page for answers to
commonly asked questions about this feature.

Press ACTION*
to display MENU.

Press to select
C/A and display SET UP
COMMERCIAL ADV.

Press

to select C/A

RECORD and press
to set “ON” or “OFF”.

ON: Timer recording, VCR Plus+ System, and One

Touch recordings are marked automatically.

When STOP is pressed during normal recording,
press :
a) 1 key (NOW)

➛ to mark now.

“NOW MARKING COMMERCIALS” appears.

b) 2 key (LATER)

➛ to mark after power is

turned off. (If tape is rewound and another
recording is started before power is turned off,
correct marking may not occur.

c) ACTION (CANCEL)

➛ marking is canceled.

• When timer is used to

record two consecutive
shows (same channel),
greater accuracy can be
obtained by programming
each show separately.

OFF : The VCR will not mark commercials.

Select when editing or dubbing a tape, or
when opting not to use this feature.

Press ACTION again to return to normal screen.

marked recordings can be

played back so that commercial blocks are
advanced through automatically or manually.

Press ACTION
to display MENU.

Marking

Playback

Press to select C/A
and display SET UP
COMMERCIAL ADV.

Press

to select C/A

PLAYBACK and press
to set “AUTO” or
“MANUAL”.

AUTO : VCR will automatically advance through

marked commercial blocks recorded on
the tape and then resume playback.

MANUAL : VCR will advance through

commercials only when CA/ZERO is
pressed. Playback will resume when
the end mark of a commercial block is
found, or a new recording or blank
portion is detected, or after 8 minutes.

Press ACTION again to return to normal screen.

• The mode set in step 3 remains unless a

power outage occurs in which case the factory
setting will be restored.

• If playback is started in the middle of a

commercial, only a single commercial is
shown, or a single commercial is longer than 1
minute, a commercial may not be skipped.
Press FF to quickly advance through the
commercial.

• Part of a recorded program may be skipped

over if the program portion between
commercials is less than one minute or there
are frequent dark and quiet scenes in the
program. To correct, press PLAY during the
skip, rewind tape to just prior to where skipping
started, then press PLAY again for normal
playback. When the end of the commercials is
detected, auto advance will resume.

Notes

REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT- OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3

VCR C / A CLOCK CH

SELECT :
EXIT : ACT I ON

SET UP COMMERCIAL ADV.
C/A RECORD :ON
C/A PLAYBACK :AUTO

VCR C / A CLOCK CH

SELECT :
EXIT : ACT I ON

VCR C / A CLOCK CH
SET UP COMMERCIAL ADV.

C/A RECORD :ON

C/A PLAYBACK :AUTO

SELECT : SET :
EXIT : ACT I ON

THE VCR IS WAITING TO
MARK COMMERCIALS IN THE
PROGRAM YOU RECORDED.

MARKING
NOW    :  PRESS 1
LATER    :  PRESS 2
CANCEL :  PRESS ACTION

REPEAT PLAY :OFF
REMOTE WARNING :ON
AUTO SHUT- OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3

VCR C / A CLOCK CH

SELECT :
EXIT : ACT I ON

SET UP COMMERCIAL ADV.
C/A RECORD :ON
C/A PLAYBACK :AUTO

VCR C / A CLOCK CH

SELECT :
EXIT : ACT I ON

VCR C / A CLOCK CH
SET UP COMMERCIAL ADV.
C/A RECORD :ON

C/A PLAYBACK :AUTO

SELECT : SET :
EXIT : ACT I ON

The most commonly asked questions about

are answered below.

Question

How fast does the VCR advance through
commercials?

Are commercials advanced through only when I
playback a recording?

Are commercials still recorded on the tape in
case I choose to view them sometime?

Does

work in all recording

speeds?

Does the VCR advance through commercials
each time I playback tapes which were
recorded using

After marking commercials, does the VCR stop at
the end of the tape, or rewind to the beginning?

Can I play my

recordings in

non-

VCRs?

Does the marking process interfere with other
programmed recordings?

What happens if I cancel the marking in
progress so I can use the VCR?

What if part of my program is advanced through
along with the commercials?

Answer

The VCR advances through a 3-minute commercial block in about 8 to 12
seconds if the tape speed is SLP. In SP, it takes about 25 to 35 seconds.

Yes. The commercials are not marked until after the recording is
finished.

Yes. By setting the C/A PLAYBACK to MANUAL, see top of this
page, you can view or advance through commercials as desired.

Yes.

works in SP, LP, and SLP.

Yes. As long as C/A PLAYBACK is set to AUTO, see top of this page,
the VCR should advance through commercials each time the tape is
played back.

The tape stops at the end of the recording so that any additional
timer recordings can be performed.

Yes.

marked recordings will play in non-

VCRs, but commercials will not be advanced through.

No. If the interval between 2 or more timer programs is not sufficient
to mark the recording, marking will be done after all recordings are
complete and the power goes off.

Marking will be resumed when the VCR's power is turned off as
long as the tape has not been ejected.

Please see the 3rd note on top of this page.

Additional Notes:
• Because of the various ways in which commercials are broadcast, the VCR may not be able to recognize all

commercials.

• If a timer recording is scheduled for the middle of the night, please be aware that the VCR will make some noise

as it rewinds and fast forwards the tape while marking commercials.

and

are registered trademarks of SRT, Inc.

A Jerry lggulden invention licensed in association with Arthur D. Little Enterprises, Inc.
U.S.Pat. No. 5,333,091; 5,692,093; 5,696,866 other patents pending

Timer Recording Using VCR Plus+ System

VCR Plus+ System is ...

This feature sets most items of a Timer Recording when you enter a PlusCode programming
number found in TV GUIDE and selected newspaper TV listings.

Initial Setup.....
To use VCR Plus+ system, clock and channels must be set (p. 4 of “Basic Operations” book).
Channel Setup.....
Broadcast/ cable stations are assigned a VCR Plus+ (GUIDE CH) number. See the Channel
Listing (directory) page of TV GUIDE, etc. In the Channel Setup below, you will be entering your
local channel number (RECEIVE CH) for each GUIDE CH number.
Example : if NBC’s assigned GUIDE CH were 05, and your TV received NBC on channel 04, you

would enter 04 across from GUIDE CH 05 in step 3 of “VCR Plus+ System Channel Setup”.

VCR Plus+ System Channel Setup

For [VCR-TV] or [VCR-cable box-TV] connection only.

Press ACTION
to display menu, and
Press
to select CHANNEL.

Press
to select VCR Plus+ CH
SET UP, and press to
set.

• Repeat step 3 until list

is complete.

• Leave line blank if

station is not received
or if GUIDE and
RECEIVE CHs are the
same.

To Make Corrections,
press

and to move to error, then

change, or ADD/DLT to erase number.

Press to move cursor
to right, press

enter number, press
to set, press

scroll up/down.

Press ACTION twice to end setup.

Do normal Timer Record if...
• PlusCode number is not listed for program.
• program (e.g. sports event) may run over set stop time.

See page 6 of “Basic Operations” book to:
• cancel a timer recording in progress.
• review, replace, or clear program contents.

Important for DSS/Cable Box Users
• When recording via DSS, the receiver must be

left on. When recording via cable or antenna,
DSS receiver must be off.

• When recording via a cable box, leave box on

and tuned to channel to be recorded.

You’ll need a local TV channel listing (e.g. TV
GUIDE) which includes the assigned VCR Plus+
numbers.

ANTENNA : CABLE
AUTO SET
WEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP

VCR C / A CLOCK CHANNEL

SELECT :
EXIT : ACT I ON

VCR C / A CLOCK CHANNEL
ANTENNA : CABLE
AUTO SET
WEAK SIGNAL DISPLAY : OFF
CABLE/DSS BOX SET UP

VCR Plus+ CH SET UP

SELECT : SET :
EXIT : ACT I ON

To Make Corrections,
press repeatedly
to delete number, then
repeat step 3.

Press PROG/VCR+ button to display PROGRAM.

Press to select
display VCR Plus+
screen.

Press NUMBER keys
to enter PlusCode
number and press
PROG/VCR+ button
to set.

VCR Plus+ System Programming

• If the PlusCode

number entered
begins with “0,” skip
to step 5. Display in
step 4 will not appear.

Press PROG/VCR+
button to end program.

Press

to select

ONCE, DAILY
(MON~FRI), or WEEKLY
record frequency and
press PROG/VCR+
button to set.

Press

to change

record speed and
press to set.

Press PROG/VCR+
button again to exit.

• Press ADD/DLT

to delete the program.

Press POWER off to set timer recording.
(“TIMER” lights on Multi Function Display.)

• Do not overlap program times.
• See “Important for DSS/Cable Box Users” left.
• Make each entry within 1 minute or VCR

exits setup.

• Once VCR Plus+ channel setup is done,

channels stay in memory. If there’s a power
outage, channel setup may be lost. Please
do channel setup again.

• Obtain unlisted PlusCode numbers by

calling 1 - 900 - 454 - 7587. Call costs about
$.95 per minute.

Notes

VCR Plus+ PROG. LIST

ENTER PLUSCODE NUMBER

USING 0 - 9 KEYS

VCR Plus+ PROG. LIST

ENTER PLUSCODE NUMBER

VCR Plus+ PROG. LIST

ONCE

DAILY(MON-FRI)
WEEKLY

SELECT :
END : PROG

VCR Plus+ PROG. LIST

DT START STOP CH SPD

13 2 : 00 P 3 : 20P 02 SLP

--  -- : --   -- : --   --   --
--  -- : --   -- : --   --   --
--  -- : --   -- : --   --   --

CANCEL   : ADD / DLT
SELECT :     SET :
EXIT    : PROG

Set to playback a recording over and over.

Repeat Play

Press ACTION to display menu.

Press ACTION to return to normal screen.

ON : Play repeats at tape end

or if unrecorded portion
over 30 sec. is detected.

Press

to select

REPEAT PLAY and
press to set ON or
OFF.

Tape Operation

To quickly return to a specified tape location.

• Unit will go into FF

or REW mode and
stop at the last point
the Counter was set
to 0:00:00.

Press RESET
COUNTER at desired
position to reset to
“0:00:00”.

Press CA/ZERO in
Stop mode to start
ZERO SEARCH.

Zero Search

Press DISPLAY during play to display
Counter.

Continue to record, playback, etc.

Press STOP.

PLAY 1 2 : 0 0AM

0 : 0 0 : 0 0

REW 1 2 : 3 0AM CH 02

0 : 30 : 30

STOP 1 2 : 3 1AM CH 02

0 : 0 0 : 0 0

REPEAT PLAY :OFF

REMOTE WARNING :ON
AUTO SHUT- OFF :OFF
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH :3

VCR C / A CLOCK CH

SELECT : SET :
EXIT : ACT I ON

MTS Broadcast/VHS Hi-Fi Stereo System

Equipped with

-TV Noise

Reduction for true MTS
reproduction.

-TV Noise

Reduction is required for good
stereo separation and audio
fidelity.

is a registered

trademark, and is licensed by

Technology Licensing.

Make the Audio/Video Connection as shown on page 3.
• You can use a TV connected to Stereo amp and speakers instead of a Stereo TV.

Stereo Amplifier

AUDIO IN

VCR

R
L

OUT TO TV

VHF/UHF

R
L

AUDIO OUT

Connection

MONO broadcast

Normal monaural sound broadcast.

SAP broadcast

Secondary Audio Program (sub language) broadcast.
Select SAP audio mode for the sub language.

MTS Stereo broadcast

Multi-channel Television Sound Stereo broadcast.
Select STEREO audio mode.

• If stereo broadcast is weak and display flickers, select

MONO audio mode for possibly better results.

MTS Stereo and SAP broadcast

Multi-channel Television Sound Stereo (main language)
and Secondary Audio Program (sub language)
broadcasts are being received simultaneously.
Select STEREO or SAP audio mode.

The following are possible audio broadcast types and on-screen displays.
The signal being received is indicated with an “ ” mark while the selected audio mode is
indicated with an arrow.
To display the broadcast signal being received,

➛

➛ press DISPLAY*.

Receivable Broadcast Types

STOP 1 2 : 0 0AM

CH 02

0 : 0 0 : 0 0

STEREO
SAP
MONO

STOP 1 2 : 0 0AM

CH 02

0 : 0 0 : 0 0

STEREO
SAP
MONO

STOP 1 2 : 0 0AM

CH 02

0 : 0 0 : 0 0

STEREO
SAP
MONO

STOP 1 2 : 0 0AM

CH 02

0 : 0 0 : 0 0

STEREO
SAP
MONO

• Arrow indicates selection.

STEREO
SAP
MONO

H I F I : L / R
H I F I : L
H I F I : R
NORMAL

• Refer to “Receivable

Broadcast Types”
above.

Press SAP/ Hi-Fi
repeatedly to select
desired mode.

Audio Mode for Recording

Press SAP/ Hi-Fi to display audio mode.
(Display disappears after 5 seconds.)

Do a recording.
See p. 5 of “Basic Operations”
Instruction book.

Audio Mode for Playback

Start playback.
See p. 5 of “Basic Operations”
Instruction book.

Press SAP/ Hi-Fi to display audio mode.
(Display disappears after 5 seconds.)

• Arrow indicates

selection.

• Select “HIFI(L/R)”

or “HIFI(L)” or
“HIFI(R)” to listen to
stereo recordings in
stereo sound.
Select “NORMAL”
for monaural sound.

Press SAP/ Hi-Fi
repeatedly to select
desired mode.

• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes

will playback in monaural sound.

• To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV

or an external stereo amp and speakers. (See top of this page.)

• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
• Hi-Fi and normal audio playback volume level may differ.

*Important: If a remote control button does not work when pressed,

press the VCR button on the remote and try the button again.

Notes

If your TV has AUDIO IN and VIDEO IN terminals, you can connect your VCR
to them to receive higher quality picture and sound.

Connect the VCR’s VIDEO OUT jack to the TV’s VIDEO IN jack.

Connect VCR’s L/R AUDIO OUT jacks to the TV’s L/R AUDIO IN jacks.

Set the VIDEO/TV selector of your TV (Monitor/Receiver) to “VIDEO.”

Audio/Video connection

VCR

IN FROM ANT.

OUT TO TV

VHF/UHF

VIDEO IN

AUDIO IN

VIDEO OUT

AUDIO OUT

You Cannot

You Can

• record and view

both scrambled
and
unscrambled
channels if
additional
equipment is
added.
This connection
requires: two
converter
boxes, an A/B
switch, and a 2-
way splitter.

• view channel

other than
the one
selected for
any type of
recording.

• do a Timer

recording of
a channel
unless you
select it at
the cable
box.

VIDEO

AUDIO

OUT

IN FROM ANT.

OUT TO TV

AUDIO

IN 1

VHF/UHF

VIDEO

OUT

IN 2

IN 1

CABLE BOX

OUT

OUT 2

OUT 1

2-Way Splitter

CABLE BOX

OUT

A/B Switch

VCR

VHF/UHF

■

Connect With Two Cable Boxes

VCR

IN FROM ANT.

OUT TO TV

AUDIO

IN 1

VHF/UHF

VIDEO

OUT

CABLE BOX

OUT

VIDEO

AUDIO

VHF/UHF

■

■ With a Cable Box (VCR Cable Box)

ANT

CATV

You Cannot

You Can

• record

scrambled
channels.

• view any

(including
scrambled)
channel.

• use VCR

Remote
Control to
select
channels
without using
Multi-brand
control feature.

ANT

CATV

The Remote Control can be set to control some TV and Cable box/DSS functions.

After remote is set up, you can select VCR, TV, or DSS/CABLE for the desired function.
Press VCR, or TV, or DSS/CABLE on the remote.
(Table below shows available unit buttons for each mode.)

• Not all functions listed may be controllable.
• In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressing

NUMBER keys for channel selection.

➛ hold down TV button,

➛ enter code with NUMBER keys.

• Repeat setup after remote battery replacement.
• Remote will not control every TV, cable box, or DSS made by the manufacturer listed.

If you get no response, your particular unit cannot be controlled. There are NO
additional codes for the products listed. If your product is not listed, then the remote is
not compatible with that product.

Multi-Brand Control Setup

Find your TV and Cable Box/DSS Receiver Brand Code Number from those shown below.

Confirm code entry,

➛ press POWER to turn your TV on or off.
• See table below for controllable functions in each mode.

Using Multi-Brand Control

➛ hold down DSS/CABLE button,

➛ enter code with number keys.
• If code number is 100 or greater,

➛ press 100 key, then other digits. E.g., press 100 - 0 - 2 for 102.

Setup for Cable or DSS control,

Mode

Unit

VCR

All

VOL UP/DOWN

POWER, INPUT, number
keys, ENTER, CH UP/
DOWN, VOL UP/DOWN

VCR/TV, PLAY, STOP,
EJECT, SAP/ Hi-Fi, DISPLAY,
FF, REW, PAUSE/SLOW,
REC, SPEED, CA/ZERO,
COUNTER RESET, TAPE
POSITION

CABLE/ DSS

CABLE/
DSS

VOL UP/DOWN

POWER, ENTER, NUMBER
keys (except 100key),
CH UP/ DOWN

Notes

Setup for TV control,

Panasonic ....................... 01, 02
Quasar ............................ 01, 02
RCA ...................................... 03
GE ......................................... 03
Zenith .................................... 04
Magnavox ............................. 05

TV Brand Code Numbers

Sylvania ................................ 05
Sharp .............................. 06, 07
Sony ...................................... 08
Toshiba ................................. 09
Sanyo .................................... 10
Fisher .................................... 10

JVC ....................................... 11
Hitachi ................................... 12
Mitsubishi ........................ 07, 13
Samsung ............................... 14
Gold Star ................... 15, 16, 17

Cable Box Brand Code Numbers

Archer ............................... 05, 06, 01, 44, 63, 91, 126
Cabletenna ................................... 01, 44, 63, 91, 126
Cableview ................. 63, 44, 42, 30, 52, 04, 124, 126
Century ......................................... 51, 44, 59, 75, 126
Citizen ...................... 63, 44, 42, 30, 52, 04, 124, 126
Curtis .............................................. 08, 09, 61, 53, 87
Diamond ....................................... 01, 44, 63, 91, 126
Drake ..................................................................... 67
Eagle .......................... 13, 22, 58, 62, 20, 40, 26, 107
Eastern .......................................................... 28, 130
GC Brand ................. 63, 44, 42, 30, 52, 04, 124, 126
Gemini ........................................................... 04, 124
General Electric ............................................... 57, 01
General Instruments .. 01, 02, 03, 04, 34, 55, 83, 106,

65, 67, 68, 115, 117, 118, 124, 91

Hamlin .......... 14, 15, 28, 41, 102, 103, 104, 108, 130
Hitachi ................................................................... 31
Jasco ............................................................. 04, 124
Jerrold ....................... 01, 02, 03, 04, 34, 55, 83, 106,

65, 67, 68, 115, 117, 118, 124, 91

Macom .................................................................. 31
Magnavox ...................................................... 26, 112
Matsushita .......................................... 16, 17, 97, 109
Movietime ......................... 32, 39, 42, 44, 126, 38, 40
NEC .......................................................... 38, 40, 32
NOVAVISION ................................. 08, 09, 61, 53, 87
NSC .......................................................... 38, 40, 32
Oak ........................................................... 46, 11, 129
Oak Sigma ............................................... 46, 11, 129
Panasonic .......................................... 16, 17, 97, 109
Philips ....................... 07, 13, 20, 23, 24, 50, 128, 129
Pioneer ............................................................ 05, 06
Pulsar ....................... 63, 44, 42, 30, 52, 04, 124, 126

Quest ............................................................... 05, 06
Radio Shack ................................. 51, 44, 59, 75, 126
RCA ................................................... 16, 17, 97, 109
Realistic ........................................ 51, 44, 59, 75, 126
Recoton ........................................ 51, 44, 59, 75, 126
Regal ............ 14, 15, 28, 41, 102, 103, 104, 108, 130
Regency ........................................................ 28, 130
Rembrandt ........................ 01, 32, 39, 42, 44, 63, 126
Salora .................................................................... 68
Samsung ........................................ 05, 32, 40, 42, 06
Scientific Atlanta ............................. 08, 09, 61, 53, 87
Sheritech ............................................................... 27
Signal ............................................................ 26, 112
SL Marx ................ 32, 40, 42, 06, 43, 44, 52, 63, 126
Sprucer ............................................... 16, 17, 97, 109
Standard Components .................. 32, 39, 42, 44, 126
Stargate .. 32, 40, 63, 44, 42, 30, 52, 04, 06, 124, 126
Sylvania ................................................................. 19
Teknika .................................................................. 74
Telecaption .................................................... 77, 127
Teleview ............................................... 32, 40, 42, 06
Texscan ........................................................... 18, 19
Tocom ...................................... 33, 34, 01, 42, 66, 91
Toshiba ................................................................. 36
Uniden Satelite ...................................................... 65
Unika ............................................ 01, 44, 63, 91, 126
Universal ................................ 42, 43, 44, 52, 63, 126
Videoway ............................................ 07, 23, 50, 129
Vid Tech ................................................................ 64
Vidtek .................................................................... 64
Viewstar ..................... 13, 22, 58, 62, 20, 40, 26, 107
Zenith ................................................. 07, 23, 50, 129

Toshiba ................................................................. 92
Hitachi/ Hughes .................................................... 93
Magnavox/ Uniden 1 ............................................. 94
Magnavox/ Uniden 2 ............................................. 95

DSS Brand Code Numbers

Panasonic ............................................................ 96
RCA ..................................................................... 97
Sony ............................................................. 98, 105

• Due to changes in infra-red commands used by manufacturers, some brands have

several codes. If your unit does not respond to the first code, please try the next one.

• Some TV, Cable Box and DSS Box brands require you to turn on the power manually.

Important
Notes

CLEAR    : ADD/DLT
SELECT  : SET:
EXIT    : ACT I ON

GUIDE CH RECEIVE CH

01 --

02 --
03 --

VCR C / A CLOCK CHANNEL

GUIDE CH RECEIVE CH

01 --

02 --
03 --

VCR C / A CLOCK CHANNEL

VCR Plus+ PROG. LIST

SELECT :
END : PROG

DATE

START

STOP

SLP

SET:

SELECT RECORD SPEED

13 SAT 2:20P 3:20P 02

TODAY

V4612S Advanced-2 (02-5-10) 2nd.p65

2002/05/10, 12:37

LSQT0579B(Advanced Operations) - Back