Panasonic NV-FJ610 User Manual

Satellite receiver here includes a digital receiver.

The connection method differs depending on the type of your
satellite receiver.

For details about the connection, also read the satellite
receiver’s operating instructions.

To an AC Mains socket

21-pin Scart cable
(not supplied)

Connect a 21-pin Scart cable (not supplied) to the AV2
21-pin Scart socket a on the VCR and to the 21-pin
Scart socket on the satellite receiver.

Connect the satellite receiver’s mains lead to an AC
mains socket.

Set “AV2” to “EXT” or “TIMER”.
For details, see page 27.

Hint:
¡ The RF output channel of the satellite receiver should be

adjusted away from channel 36, which is used by the
VCR, e.g. re-adjust to channel 33.

If your satellite receiver is equipped with a 21-pin Scart
socket, use a 21-pin Scart cable to connect the VCR.

For the connection to the TV, refer to page 7.

Be sure to keep the VCR, TV and satellite receiver switched
off until you have finished all connections.
For your safety, do not connect or handle the equipment with
wet hands.

Satellite receiver (not supplied)

In case your satellite receiver is not equipped with a 21-pin
Scart socket, use the RF coaxial cable to connect it to the
VCR.

For the connection to the TV, refer to page 7.

Be sure to keep the VCR, TV and satellite receiver switched
off until you have finished all connections.
For your safety, do not connect or handle the equipment with
wet hands.

Connect the aerial lead to the Aerial Input socket on the
satellite receiver.

Connect the RF coaxial cable to the Aerial Output
socket on the satellite receiver and to the Aerial Input
socket c on the VCR.

Connect the satellite receiver’s mains lead to an AC
mains socket.

Aerial (not supplied)

Satellite receiver (not supplied)

Aerial Input socket

Aerial lead
(not supplied)

To an AC mains socket

Aerial Output
socket

RF coaxial cable
(not supplied)

a

c

21-pin Scart socket
¡If your satellite

receiver has a
VCR socket,
connect the cable
to it.