Panasonic AJ-HD150FE User Manual
– 6 –
General and Features
Features
(continued)
Time codes
This unit comes with a built-in time code generator (TCG)/time code reader (TCR). In
addition to the internal time code, an external time code can also be recorded as the LTC on
the unit’s tape.
addition to the internal time code, an external time code can also be recorded as the LTC on
the unit’s tape.
Multi-functional interfaces
•
Serial digital input and output connector
The unit features a HD component serial interface input/output connector to enable HD
component video signals and 8-channel digital audio signals to be interfaced using just the
one BNC connector. (SMPTE292M/BTA S-004)
It is also possible to output SD component serial signals provided that the HD-SD format
converter board (optional accessory) is installed. (SMPTE259M-C, 272M, 294M)
component video signals and 8-channel digital audio signals to be interfaced using just the
one BNC connector. (SMPTE292M/BTA S-004)
It is also possible to output SD component serial signals provided that the HD-SD format
converter board (optional accessory) is installed. (SMPTE259M-C, 272M, 294M)
•
Analogue video output connector
Composite output connectors are provided as a standard feature. They output composite
signals during DVCPRO reciprocal playback, DV playback or down-conversion. At all other
times, they output the black burst signal.
signals during DVCPRO reciprocal playback, DV playback or down-conversion. At all other
times, they output the black burst signal.
•
AES/EBU audio input/output connectors
Digital audio input/output connectors for 8 channels are featured as a standard accessory.
•
9-pin RS-422A and RS-232C remote control connectors
In addition to the standard 9-pin serial remote (RS-422A) control connector, the unit is
equipped with RS-232C and 50-pin parallel remote control connectors.
The RS-422A facility enables parallel operation if a loop connection has been performed
between the unit and another VTR.
equipped with RS-232C and 50-pin parallel remote control connectors.
The RS-422A facility enables parallel operation if a loop connection has been performed
between the unit and another VTR.
8-channel high-sound-quality digital audio
The 8-channel PCM audio allows for not only independent editing and mixing on all eight
channels. One channel is provided for the analogue CUE track.
channels. One channel is provided for the analogue CUE track.
Menu-driven setup
The setup settings, which are conducted prior to operating the unit are performed while
viewing the setup menus either on the unit’s display or a TV monitor.
viewing the setup menus either on the unit’s display or a TV monitor.