Panasonic AJ-D850P User Manual
– 59 –
USER menu
<OPERATION>
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
100
SEARCH
0000
DIAL
ENA
0001
KEY
101
SHTL MAX
0000
×
16
0001
×
32
0002
×
60
102
FF. REW
0000
×
32
MAX
0001
×
60
0002
×
100
103
AUDIO
0000
OFF
MUTE
0001
ON
104
REF
0000
OFF
ALARM
0001
ON
105
AUTO EE
0000
S/F/R
SEL
0001
STOP
0002
BLACK
106
PLAY
0000
0
.
.
.
.
DELAY
.
.
0015
15
The underline on the setting item denotes the initial setting.
This selects the direct search dial operation.
0: For direct search dial operations.
1: Operation is not transferred to the search mode unless the
0: For direct search dial operations.
1: Operation is not transferred to the search mode unless the
search button is pressed.
This sets the maximum speed for shuttle operations.
0: 16
0: 16
×
normal speed
1: 32
×
normal speed
2: 60
×
normal speed
<Note>
During DV or DVCAM format, the maximum speed is 32
During DV or DVCAM format, the maximum speed is 32
×
normal speed even when 60
×
is selected.
This sets the maximum speed for FF and REW operations.
0: 32
0: 32
×
normal speed
1: 60
×
normal speed
2: 100
×
normal speed
<Note>
During DV or DVCAM format, the maximum speed is 32
During DV or DVCAM format, the maximum speed is 32
×
normal speed regardless of this setting.
This sets the status until the audio signal is output when
operation switches from the stop or search modes to the play
mode.
0: The time until the audio is output is shortened.
1: The audio is output after the status stabilizes.
<Note>
When set to 0 (OFF), the sound in the initially output part is
incomplete. Therefore, this setting is not recommended for
broadcasts.
operation switches from the stop or search modes to the play
mode.
0: The time until the audio is output is shortened.
1: The audio is output after the status stabilizes.
<Note>
When set to 0 (OFF), the sound in the initially output part is
incomplete. Therefore, this setting is not recommended for
broadcasts.
This selects whether to warn the operator when the
REF.VIDEO signal has not been connected.
0: Warning is not given.
1: Warning is given by the flashing STOP lamp.
REF.VIDEO signal has not been connected.
0: Warning is not given.
1: Warning is given by the flashing STOP lamp.
This selects the VTR mode in which the EE status is
established when the TAPE/EE switch is set to EE.
0: EE status is established in the STOP, FF or REW mode.
established when the TAPE/EE switch is set to EE.
0: EE status is established in the STOP, FF or REW mode.
However, EE status is always established in EJECT mode
regardless of the TAPE/EE switch setting.
regardless of the TAPE/EE switch setting.
1: EE status is established only in the stop mode. However,
EE status is always established in EJECT mode regard-
less of the TAPE/EE switch setting.
less of the TAPE/EE switch setting.
2: EE status is established only in the stop mode. However,
depending on TAPE/EE switch setting EJECT mode is as
follows:
TAPE/EE switch EE:
follows:
TAPE/EE switch EE:
EE status
TAPE/EE switch TAPE: BLACK status for video
MUTE status for audio
This set the play delay time in frame increments.