Panasonic AJ-HD1700PE User Manual

117

This  VTR  is  equipped  with  an  auto  head  cleaning
function which automatically reduces the amount of
dirt  on  the  video  heads.    In  order  to  maximize  the
VTR’s reliability, however, it is recommended that the
video heads be cleaned as and when appropriate.

For further details on how to actually clean the heads,
consult with one of Panasonic’s service companies or
with your dealer.

Condensation occurs due to the same principle which
is involved when droplets of water form on a window
pane of a heated room.  It occurs when the VTR or
tape is moved between places where the temperature
or humidity varies greatly or when, for instance:
• It is moved to a very humid place full of steam or a

room immediately after it has been heated up.

• It is suddenly moved from a cold location to a hot or

humid location.

After  moving  the  VTR  to  such  a  location,  leave  it
standing for about 10 minutes rather than switching on
its power immediately.

If  condensation  has  formed  on  or  in  the  VTR,  the
AUTO  OFF  lamp  lights,  and  the  cassette  tape  is
automatically ejected.

Keep the power supplied and

simply wait until the AUTO OFF lamp goes off.
It is recommended that the video heads be cleaned
after the AUTO OFF lamp has gone off.

Before proceeding with maintenance, be absolutely
sure to set the power switch to OFF and take hold of
the power plug and unplug it from the power outlet.
Use  a  soft  cloth  to  clean  the  cabinet.    To  remove
stubborn  dirt,  dilute  some  kitchen  detergent,  dip  a
cloth  into  the  solution,  wring  it  out  well,  and  wipe.
After having removed the dirt, take up any remaining
moisture using a dry cloth.

<Note>  
Do not use alcohol, benzene, paint thinners or other
solvents.    They  can  discolor  the  external  parts
surfaces and remove the finish.