Panasonic AJ-D650 User Manual

102 

FF. REW

0000

X 32

This sets the maximum speed for FF and REW operations.

MAX

0001

X 60

0: 32× normal speed

0002

X 100

1: 60× normal speed

2: 100× normal speed
<Note>

During DV format, the maximum speed is 32× normal speed
regardless of this setting.

103 AUDIO

0000

MUTE

0001

1 0 4   R E F

ALARM

106 PLAY

DELAY

0000
0001

0000

0015

OFF

This sets the status until the audio signal is output when

ON

operation switches from the stop or search modes to the play
mode.
0: The time until the audio is output is shortened.

1: The audio is output after the status stabilizes.

<Note>
When set to 0 (OFF), the sound in the initially output part is

incomplete. Therefore, this setting is not recommended for
broadcasts.

OFF

This selects whether to warn the operator when the

ON

REF.VIDEO signal has not been connected.

0: Warning is not given.

1:

Warning is given by the flashing STOP lamp.

0

This sets the play delay time in frame increments.

15

107 CAP. LOCK

0000

2F

This selects the capstan lock mode.

0001

4 F

0: 2F mode

1: 4F mode

108 FORMAT

0000

DVCPRO

This selects the format which applies when the general

SEL

0001

DV

purpose cassette is used. After selection, this status becomes
effective only when the cassette is inserted after ejection.
0: DVCPRO mode

1: DV mode

109

EJECT EE
SEL

0000
0001

Take care not to insert a tape whose format is the reverse of
the one selected since the following trouble as well as playback
trouble will occur.

1. A recording operation is initiated if a DV cassette is inserted

when the DVCPRO mode is selected.

No guarantees can be made for performance, etc.
Conversely, no recording can be conducted if a DVCPRO

cassette is inserted when the DV mode is selected.

2. The REMAIN display loses its accuracy.
3. The accuracy of the slowdown position near the start and

end of the tape is lost.

EE

This selects whether EE mode or BLACK is to be used during

BLACK

EJECT status
0: EE mode

1: Video blackens, audio mutes.

110

F/R EE SEL

0000

EE

This selects whether EE mode or playback mode is to be

0001

TAPE

used during FF/REW operations.
0: EE mode
1: Playback mode

111 STOP EE

0000

EE

This selects whether EE mode or playback mode is to be

SEL

0001

TAPE

used during stop mode.
0: EE mode

1: Playback mode

<Note>
The STAND-BY OFF mode complies with the above selection.
When TAPE is selected, however, the video becomes grey.

The underline on the setting item denotes the initial setting.

– 2 9 –