Panasonic AJ-HD130DCP User Manual
22
How to load the user defaults
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The VTR is set to the menu setting mode, and
the menu screen is displayed on the video
monitor.
MENU position.
The VTR is set to the menu setting mode, and
the menu screen is displayed on the video
monitor.
1
Press the RESET button.
The VTR is set to the default setting mode, and
the default setting screen is displayed on the
video monitor.
The VTR is set to the default setting mode, and
the default setting screen is displayed on the
video monitor.
2
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the LOAD
position, and press the SET button.
The VTR is set to the LOAD mode, and the
LOAD screen is displayed on the video monitor.
button to move the cursor to the LOAD
position, and press the SET button.
The VTR is set to the LOAD mode, and the
LOAD screen is displayed on the video monitor.
3
SELECT MODE
2
0 ESCAPE
1 LOAD
2 SAVE
3 PROTECT
1 LOAD
2 SAVE
3 PROTECT
SET–UP MENU
<LOAD>
2
NO
FACTORY
USER (ALL)
USER (NOT SYSTEM)
FACTORY
USER (ALL)
USER (NOT SYSTEM)
Press the MENU-UP button or MENU-DOWN
button to move the cursor to USER (ALL), and
press the SET button.
button to move the cursor to USER (ALL), and
press the SET button.
O
If the cursor is moved to USER (NOT
SYSTEM) and this operation is performed,
operations are performed using the user
settings stored in the memory for all the menus
with the exception of the SYSTEM menu.
SYSTEM) and this operation is performed,
operations are performed using the user
settings stored in the memory for all the menus
with the exception of the SYSTEM menu.
O
If the cursor is moved to NO and this operation
is performed, operation returns to the menu
screen while the user settings stored in the
memory remain unchanged.
is performed, operation returns to the menu
screen while the user settings stored in the
memory remain unchanged.
4
Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.
This completes the menu settings.
LOCAL or REMOTE position.
This completes the menu settings.
5
How to protect the menus
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The VTR is set to the menu setting mode, and
the menu screen is displayed on the video
monitor.
MENU position.
The VTR is set to the menu setting mode, and
the menu screen is displayed on the video
monitor.
1
By setting the unit to the menu protection mode,
opening of the setup menus can be prevented even
when the LOCAL/MENU/REMOTE switch on the front
panel has been set to the MENU position.
opening of the setup menus can be prevented even
when the LOCAL/MENU/REMOTE switch on the front
panel has been set to the MENU position.
Press the RESET button.
The VTR is set to the default setting mode, and
the default setting screen is displayed on the
video monitor.
The VTR is set to the default setting mode, and
the default setting screen is displayed on the
video monitor.
2
3
SELECT MODE
2
0 ESCAPE
1 LOAD
2 SAVE
3 PROTECT
1 LOAD
2 SAVE
3 PROTECT
MENU PROTECT OK?
2
NO
YES
Press the MENU-UP button or MENU-DOWN
button to move the cursor to YES, and press
the SET button.
The menu screen now appears.
button to move the cursor to YES, and press
the SET button.
The menu screen now appears.
4
Setup (Initial Settings)
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the PROTECT
position, and press the SET button.
The VTR is set to the menu protection setting
mode, and the screen for checking the menu
protection function is displayed on the video
monitor.
button to move the cursor to the PROTECT
position, and press the SET button.
The VTR is set to the menu protection setting
mode, and the screen for checking the menu
protection function is displayed on the video
monitor.