Panasonic AJ-HD130DCP User Manual
27
101
SHTL MAX
0000
0001
0001
X8.4
X16
For setting the maximum shuttle mode speed when using the external
controller connected to the 9-pin remote connector.
0: 8.4
controller connected to the 9-pin remote connector.
0: 8.4
a
normal speed
1: 16
a
normal speed
104
REF ALARM
0000
0001
0001
OFF
ON
For setting whether the warnings are to be indicated when the REF VIDEO
has not been connected.
1: No warnings are indicated.
2: Warnings are indicated by the STOP lamp which flashes.
has not been connected.
1: No warnings are indicated.
2: Warnings are indicated by the STOP lamp which flashes.
152
HUMID OPE
0000
0001
0001
OFF
ON
For setting the operation to be performed when condensation has formed.
0: The unit does not operate when condensation has formed.
1: The unit can be operated when condensation has formed but no
0: The unit does not operate when condensation has formed.
1: The unit can be operated when condensation has formed but no
guarantee is made that it will operate properly.
<Note>
Due to the possibility of tape damage and other problems, select the “0:
Unit does not operate” setting for normal operation.
Due to the possibility of tape damage and other problems, select the “0:
Unit does not operate” setting for normal operation.
106
EJECT EE SEL
0000
0001
EE
BLANK
For setting the video and audio output statuses when the tape is ejected.
0: The signals are always output in the E-E (electric modulation to electric
0: The signals are always output in the E-E (electric modulation to electric
playback) mode regardless of the position of the TAPE/EE switch.
1: The output status changes according to the position of the TAPE/EE
switch.
EE
EE
: The signals are output in the E-E mode.
TAPE : A blank is output for the video signals, and the audio signals are
muted.
OPERATION
Item
Setting
No.
Superimposed
display
No.
Superimposed
display
Description of setting
The underlining denotes the factory mode.
Setup Menus
110
AUTO REW
0000
0001
0001
OFF
ON
For setting whether the tape is to be rewound automatically to its start
when the tape-end has been detected.
0: The tape is not rewound.
1: The tape is rewound to its start.
when the tape-end has been detected.
0: The tape is not rewound.
1: The tape is rewound to its start.
112
FRZ MODE SEL
0000
0001
0001
DIS
STBOFF
For setting the video output when the mode has moved from playback
images to the STANDBY OFF (half loading) mode.
0: The video output is muted.
1: The playback image appearing at the moment when the STANDBY OFF
images to the STANDBY OFF (half loading) mode.
0: The video output is muted.
1: The playback image appearing at the moment when the STANDBY OFF
(half loading) mode is established is frozen and output.
114
REC INH LAMP
0000
0001
0001
LIGHT
FLASH
For setting the REC INHIBIT lamp operation when the cassette is set to the
accidental erasure prevention mode.
0: The lamp lights.
1: The lamp flashes.
<Notes>
The REC INHIBIT lamp always lights regardless of this setting when the
REC INHIBIT switch on the front panel is set to the ON position.
accidental erasure prevention mode.
0: The lamp lights.
1: The lamp flashes.
<Notes>
The REC INHIBIT lamp always lights regardless of this setting when the
REC INHIBIT switch on the front panel is set to the ON position.
115
EJECT SW INH
0000
0001
REC
OFF
For setting a restriction on the operation of the front panel’s EJECT button.
0: Operating the button is prohibited while the recording mode is
0: Operating the button is prohibited while the recording mode is
established.
1: The button can be operated in any mode.
117
M CASSTT INH
0000
0001
0001
OFF
ON
For setting a restriction on recording onto M-size cassette tapes.
0: Recording onto M-size cassette tapes is permitted.
1: Recording onto M-size cassette tapes is prohibited.
0: Recording onto M-size cassette tapes is permitted.
1: Recording onto M-size cassette tapes is prohibited.
150
SEARCH SPEED
0000
0001
0001
X4.1
X8.4
X8.4
For setting the speed at which the tape is to decelerate when the front
panel’s search button is pressed.
0: 4.1
panel’s search button is pressed.
0: 4.1
a
normal speed
1: 8.4
a
normal speed