RCA PSVR65 User Manual
24
Using the Remote Control
Controlling an Auxiliary Component
The remote that came packed with your VCR is also capable of controlling one compatible RCA audio component (such as
an AM/FM radio, CD player, tape player, phonograph); ProScan, RCA or GE digital satellite receiver; or RCA DVD
component. The remote must be programmed for the specific component it is to control. To program the remote, use the
code that corresponds to your component.
an AM/FM radio, CD player, tape player, phonograph); ProScan, RCA or GE digital satellite receiver; or RCA DVD
component. The remote must be programmed for the specific component it is to control. To program the remote, use the
code that corresponds to your component.
Operate the Auxiliary Component
After you have setup your remote to control your component, test the buttons to see
which ones operate the component.
which ones operate the component.
1. Point the remote at the component and press AUX.
2. If the component does not turn on in step 1, press AUX and then PWR.
3. Test the buttons on the remote to see which ones operate your component.
Program the Remote for an Auxiliary Component
1. Turn on the component.
2. Point the VCR remote at the component.
3. Hold the AUX button and press three number buttons to enter the code for
your component.
4. Release the buttons.
5. Press PWR on the remote. If the component turns off, setup is complete.
*The remote may not be able to control every ProScan, RCA, or GE model of
auxiliary equipment listed.
Type of Auxiliary Equipment and Code
Cassette
Satellite Cassette
AM/FM
AUX
Phono
Tape1
CD
Receiver
Tape2
DVD
003
004
005
006
007
008
009
010