Sony SLV-SF950N User Manual
102
filename[01GB08ADD-NP0.fm] model name1[SLV-SF900D/E] model name2[]
[3-xxx-xxx-E1 (1)]
Canal Plus
S22
PAY-TV/Canal Plus
is always recorded
scrambled.
is always recorded
scrambled.
t Make sure the Canal Plus Scart cable is plugged in securely.
t Be sure that DECODER/LINE3 is set to DECODER in the OTHER
t Be sure that DECODER/LINE3 is set to DECODER in the OTHER
OPTIONS menu (see page 70).
t Be sure that this channel is set as PAY-TV/CANAL+ in the TUNER
menu (see page 36).
Line selection
S23
You cannot select
LINE3.
LINE3.
t Be sure that DECODER/LINE3 is set to LINE3 in the OTHER
OPTIONS menu (see page 70).
Remote
commander
commander
S24
The remote
commander does not
operate.
commander does not
operate.
t Make sure you are pointing the remote commander at the remote
sensor on the VCR.
t Replace all of the batteries in the remote commander with new ones
if they are weak.
t Make sure the TV/VIDEO remote control switch is set correctly.
S25
You cannot control
your TV.
your TV.
t Set your TV’s code number. The code number may change when
you replace the batteries for the remote commander (see page 8).
Cleaning
S26
The VCR needs to be
cleaned.
cleaned.
t Clean the cabinet, panel and controls with a dry, soft cloth, or a soft
cloth slightly moistened with a mild detergent solution. Do not use
any type of solvent, such as alcohol or benzene.
any type of solvent, such as alcohol or benzene.
Clock
S27
The clock has
stopped and “–:– –”
lights up in the
display window.
stopped and “–:– –”
lights up in the
display window.
t The clock stops if the VCR is disconnected from the mains for
more than one hour. Reset the clock and timer if needed (see page
21).
21).
Power
S28
The ?/1 ON/
STANDBY switch
does not function.
STANDBY switch
does not function.
t Connect the mains lead to the mains securely.
S29
The power is turned
on but the VCR does
not operate.
on but the VCR does
not operate.
t Moisture condensation has occurred. Turn the power off, unplug
the mains lead and leave the VCR to dry for over three hours.
S30
The tape is ejected
when you press ?/1
ON/STANDBY.
when you press ?/1
ON/STANDBY.
t You have set a timer recording, but the tape on which you want to
record is protected (or contains protected recordings). Unlock the
protection or use another tape or replace the safety tab (see page
95).
protection or use another tape or replace the safety tab (see page
95).
S31
The display does not
lit when the VCR is
in standby mode.
lit when the VCR is
in standby mode.
t The VCR is in power save mode. Set the POWER SAVE option to
OFF in the OTHER OPTIONS menu (see page 70).
S32
POWER SAVE is set
to ON but the display
remains lit in standby
mode.
to ON but the display
remains lit in standby
mode.
t The display is always lit if the VCR is in timer standby mode. For
more details regarding the energy saving function, see page 70.