Sony HDW-S2000 User Manual

Appendix

Appendix

A-7

M3

M3A:
OUTPUT
PHASE
SELECT

M3A0:
HD PHASE
SEL

Select the HD video output signal phase with respect to the reference signal: 0H
or -90H (HD) advanced.
[0H] : Output in sync with the reference signal.
–90H: Output with the phase delayed by –90H (HD) with respect to the reference

signal.

M3A1:
SD PHASE
SEL

Select the SD video output signal phase with respect to the reference signal: 0H
or –2H (SD) advanced.
[0H] : Output in sync with the reference signal.
–2H: Output with the phase delayed by –2H (SD) with respect to the reference

signal.

M3A2:
SD UPCNV
SEL

Select whether the SD video output signal phase in SD tape playback should be
in sync or one frame delayed.
[noml] : Output the SD video with the phase unchanged. (The HD video output is

delayed by one frame with respect to the reference signal.)

HD: Output the SD video with the phase delayed by one frame. (The HD video

output and SD video output are in phase with the reference signal.)

HDCAM

23.98PsF

Yes

f

f

v

24PsF

f

Yes

25PsF

f

Yes

v

50i

29.97PsF

v

v

Yes

59.94i

30PsF

v

v

f

60i

Betacam SX

50i (PAL)

No

59.94i (NTSC)

Betacam/SP

50i (PAL)

59.94i (NTSC)

Yes

No

No

Yes

Yes

 a)

No

No

  Yes

 b)

For the HD/SD video output phase setting, you can use
the maintenance menu.

The SDSDI (D1) output and component/composite
outputs have the same phase.

Yes: Both video and audio playback is possible.
f: Both video and audio “off-speed” playback is possible.
v: Video only “off-speed” playback is possible. Audio is

muted.

No: Neither video nor audio playback is possible.
a) Playback on J and SYL models is simple playback

quality.

b) Playback on PAL models is simple playback quality.

If the playback tape format and system frequency are
different, the audio setting display section 3 (page
2-5) in the audio control section flashes.