Sony MSW-M2100P User Manual

Chapter 8

Setup Menus

Chapter 8 Setup Menus

8-7

Menu items in the range 100 to 199, relating to the control panels

The extended setup menu contains the following
items.

101

SELECTION FOR
SEARCH DIAL ENABLE

Select how the unit enters the search mode.
DIAL : Turning the search dial switches to search mode.
KEY: One of the JOG, SHUTTLE, and VAR buttons must be pressed to switch to

search mode.

102

MAXIMUM SPEED

Select the fast forward and rewind tape speed and also search mode speed
during tape playback.
MAX : Perform fast forward, rewind, and search mode playback at the maximum

speeds.

MX/24: Perform fast forward and rewind at the maximum speeds, and search

mode playback at up to 24 times normal speed.

×24: Perform fast forward and rewind at 24 times normal speed, and search

mode playback at up to 24 times normal speed.

Maximum fast forward and rewind speeds
• Analog cassette: 35 times (525-line mode) or 42 times (625-line mode) normal

speed.

• Betacam SX/MPEG IMX cassettes: 60 times normal speed (525-line mode) or

78 times (625-line mode)

Maximum search mode speeds
• Analog cassette: 35 times (525-line mode) or 42 times (625-line mode) normal

speed.

• Digital Betacam cassette: 50 times normal speed

104

AUDIO MUTING TIME

Select the length of time for which audio muting occurs when the unit switches to
playback either from stopped or from still playback in the search mode.
OFF : Set the audio muting time to zero (i.e. no muting).
0.1S ... 1.0S: Set the audio muting time from 0.1 second to 1.0 second, in 0.1-

second increments.

105

REFERENCE SYSTEM
ALARM

Select whether or not to display a warning when the video reference signal is not
supplied.
OFF: No warning.
ON : Flash the STOP button as a warning.

103

AUDIO SELECTED LINE
OUT

Select the output signal to the MONITOR OUTPUT connectors.
MANU : Output the signals selected by the audio signal selection buttons on the

lower control panel.

AUTO1: Output stereo, using the AFM channels (3 and 4) for playback from

metal tape, and the LNG channels (1 and 2) for playback from oxide tape.

AUTO2: Output the signals selected by the audio signal selection buttons on the

lower control panel, but during variable speed playback, if AFM is selected,
automatically switch to LNG.

106

Select the capstan servo lock mode.
PANEL : The capstan servo lock mode is determined by the function menu item

CAPSTN.

2F: The capstan servo locks every two fields regardless of the setting of the

function menu item CAPSTN.

4F: The capstan servo locks every four fields regardless of the setting of the

function menu item CAPSTN.

8F (For 625-line mode only): The capstan servo locks every eight fields

regardless of the setting of the function menu item CAPSTN.

(Continued)

CAPSTAN LOCK

In the “Settings” column of the table, the factory
default settings are indicated by an enclosing box.