Sony HVR-M25P User Manual

2

This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.

This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

The model number and the serial number are located at the
name plate on the left of the unit. Record the serial number in
the space provided below. Refer to these numbers whenever
you call upon your Sony dealer regarding this product.

Model No. HVR-

Serial No. ______________________

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)
that produce heat.

• Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

• Only use attachments/accessories specified by the

manufacturer.

• Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the
apparatus.
When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury
from tip-over.

• Unplug this apparatus during lightning storms or when

unused for long periods of time.

• Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.

• This unit is not designed as a portable. Make sure to install

the unit properly on a flat surface. If you install the unit so
that it is inclined 30 degrees or more (i.e., if you stand the
unit on its side), malfunctions may occur.

• Do not place materials around the unit that may block the

ventilation holes. Otherwise, heat builds up inside the unit
and malfunctions may occur.

• Install the unit nearby the wall socket, disconnect the mains

plug from the wall socket immediately if any malfunction
occurs while using this unit.