Sony SLV-SE740B User Manual

59

Synchronized Recording (not available on SLV-SE640B and SE240B)

Press ENR SYNCHRO on the VCR.  The ENR SYNCHRO indicator 
disappears.

Press x (stop) while recording.

• This function may not work with some types of satellite tuners.
• Some TVs or other equipment with timer functions will automatically turn off if no 

operation is performed within a certain amount of time.  In this case, the 
Synchronized Recording also stops automatically.

• When the connected equipment turns on while the ENR SYNCHRO indicator 

lights up in red, recording starts automatically.

• If the settings for timer recording and Synchronized Recording overlap, the 

programme that starts first has priority and the second programme starts recording 
only after the first programme has finished.

• The Auto Clock Set function does not work while the VCR stands by for 

Synchronized Recording.

*

1

SLV-SE840B

*

2

SLV-SE740B, SE640B and SE240B

• Insert a tape with its safety tab in place.  

Make sure the tape is longer than the total 
recording time.

• Refer to “Index to parts and controls” for 

button locations.

Press CHOIX ENTREE or CHAINE +/– to display “L3*

1

 (or L2*

2

)” in 

the display window.

Set the timer on the connected equipment to the time of the programme 
you want to record, then turn it off.

Press SP/LP to select the tape speed.

Hold down ENR SYNCHRO on the VCR for more than two seconds.

The ENR SYNCHRO indicator lights up in red and the VCR stands by 
for recording.

The VCR automatically turns on and starts recording when it receives an 
input signal from the connected equipment.

The VCR automatically stops recording when the tape reaches the end or 
when the connected equipment stops transmitting an input signal.