Sony 1500AP User Manual
40
Playback
Ch
apt
er
apt
er
2
R
e
co
rd
rd
in
g
a
nd P
la
y
b
a
ck
To perform the following operations
a) When the SEARCH ENABLE menu item (see page 65) is set to ENABLE.
Operation
Do this:
Stop playback.
Press the STOP button.
The unit enters stop mode, and will automatically
switch to standby off mode after the time set with the
STOP TIMER menu item
The unit enters stop mode, and will automatically
switch to standby off mode after the time set with the
STOP TIMER menu item
for tape
protection.
Adjust the audio playback
level.
level.
For digital (optional DSBK-1501 required) or
analog audio output
Set the VAR switch on the front panel to PB and use
the REC/PB LEVEL control knob for each channel.
analog audio output
Set the VAR switch on the front panel to PB and use
the REC/PB LEVEL control knob for each channel.
For outputs from the PHONES connector and
MONITOR connector
Use the PHONES control knob on the front panel
(outputs from the PHONES connector on the front
panel and the MONITOR connector on the rear panel
are adjusted).
MONITOR connector
Use the PHONES control knob on the front panel
(outputs from the PHONES connector on the front
panel and the MONITOR connector on the rear panel
are adjusted).
Play back in shuttle mode
while monitoring the
video.
while monitoring the
video.
a)
To carry out a high-speed search (10 times normal
speed) in forward or reverse direction, press the G or
g button.
To return to normal-speed playback, press the PLAY
button.
speed) in forward or reverse direction, press the G or
g button.
To return to normal-speed playback, press the PLAY
button.
Note
When performing these operations, set the LOCAL/
REMOTE switch on the front panel to LOCAL.
REMOTE switch on the front panel to LOCAL.
Play back in jog mode while
monitoring the video.
monitoring the video.
a)
To carry out frame-by-frame playback in forward or
reverse direction, press the f or F button.
When you hold down the f or F button, playback is
reverse direction, press the f or F button.
When you hold down the f or F button, playback is
continued in jog mode (
−
1
/
2
times normal speed
) in
forward or reverse direction.
Note
When performing these operations, set the LOCAL/
REMOTE switch on the front panel to LOCAL.
REMOTE switch on the front panel to LOCAL.
Inhibit the unit from
outputting text information
(time data, operation mode
indications, etc.) to the
video monitor.
outputting text information
(time data, operation mode
indications, etc.) to the
video monitor.
to OFF.
Remove the cassette.
Press the EJECT button.
If a CNT value is shown in the time counter display,
the CNT value is reset.
If a CNT value is shown in the time counter display,
the CNT value is reset.
Disable the automatic
rewind function.
rewind function.
DISABLE.
Change the time period
before the unit switches
from stop mode to standby
off mode.
before the unit switches
from stop mode to standby
off mode.
Change the setting of the STOP TIMER menu item
.