Sony SVT-168E User Manual

Page of 172
34
Alarm Recording
4
Set ALARM MODE to A1, A2, A3 or OFF by
pressing MENU + or –.
A (alarm)1: always accepts alarms.
A2: accepts alarms only when  timer recording is
proceeding.
A3: accepts alarms only when timer recording is
not proceeding.
OFF: does not accept alarm even if an alarm
signal is received.
5
Press SEARCH to return to the normal display.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until “NEXT PUSH B” flashes and
press MENU B.
Notes
• While alarm recording is in progress, other modes are
inoperable.
• After the alarm recording is completed, the VCR returns to
the condition it was in before the alarm signal was
received.
• If an alarm input is received while the VCR is in repeat
recording (see page 21), repeat recording stops and the
REPEAT indicator goes out. After the tape reaches the
end, the tape is rewound and the VCR stops. The OFF
indicator lights in the display window (only when
REPEAT 1 is selected for TAPE END MODE in the
GENERAL SET menu).
• When the OFF indicator lights, in order to prevent
accidental erasure of a recorded tape, timer recording and
alarm recording cannot be executed.
If any of REC z, FF M, REW m, PLAY B, STOP x
is pressed, the OFF indicator goes out.
• If another alarm is received while alarm recording is in
progress, the second alarm recording starts and the
recording duration is extended.
• If the power is interrupted while alarm recording is in
progress and restored again, the operation before the alarm
recording was made resumes.
A1
ALARM  SET
ALARM  MODE
ALARM  SPEED
6 H
2 0 s e c
ALARM  DURATION
ALARM  DATA  REC
TAPE  END  WARN.
CLOG  DETECTION
SERIES  REC
SELECT :
DATA  SET : 
+
/
RETURN : MENU
<
NEXT  PUSH     
>
OFF
COUNTER
ON
OFF
5
Press MENU V to move the flashing to the setting
of ALARM DURATION and set 20sec, 40sec,
1min, 2min, 3min, 4min, 5min or CC by pressing
MENU + or –.
20sec - 5min: for recording for 20 seconds, 40
seconds, 1 minute, 2 minutes, 3 minutes, 4
minutes or 5 minutes
CC: for recording as long as the alarm signal is
being input
6
Press SEARCH to return to the normal display.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V until “NEXT PUSH B” flashes and
press MENU B.
Setting the Alarm Recording
Mode
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until “3” of the MAIN
MENU flashes on the monitor screen.
3
Press MENU B.
The ALARM SET menu appears.
A1
ALARM  SET
ALARM  MODE
ALARM  SPEED
6 H
4 0 s e c
ALARM  DURATION
ALARM  DATA  REC
TAPE  END  WARN.
CLOG  DETECTION
SERIES  REC
SELECT :
DATA  SET : 
+
/
RETURN : MENU
<
NEXT  PUSH     
>
OFF
COUNTER
ON
OFF