Sony SLV-SE210D User Manual

Editing with another VCR

ditio

al Op

er
atio

Note

• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-

2106HG cable instead and connect the cable to the line out jacks of the other VCR.

Operation (when recording on this VCR)

Before you start editing

• Turn on your TV and set it to the video

channel.

• Press INPUT SELECT to display the

connected line in the display window.

To stop editing

Press the x (stop) buttons on both VCRs.

Tip

• To cut out unwanted scenes while editing, press X (pause) on this VCR when an

unwanted scene begins. When it ends, press X (pause) again to resume recording.

Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.

Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press X (pause).

Press z REC on this VCR to set it to recording pause.

To start editing, press the X (pause) buttons on both VCRs at the same
time.

REC