Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. DSR-1500P
  5. User Manual

Sony DSR-1500P User Manual

Download
Page of 120
51
Digitally Dubbing Signals in DVCAM Format
Chap
te
r 
3
   Con
v
en
ient
 F
unc
tions
 f
o
r Edit
ing
 O
per
a
tio
n
Digitally Dubbing Signals 
in DVCAM Format
In addition to straightforward tape dubbing, you can also 
use this unit to dub automatically from the beginning of the 
tape to the end through the SDTI (QSDI) or i.LINK 
interface.
• To use the SDTI (QSDI) interface, the optional DSBK-
1501 board is required.
• To use the i.LINK interface, the optional DSBK-1503 
board is required.
When a tape recorded on a DSR-1/1P Digital 
Videocassette Recorder or DSR-130/130P Digital 
Camcorder is dubbed, the ClipLink log data held in the 
cassette memory is also copied.
Notes
• Use a tape recorded in the DVCAM format. A tape 
recorded in DV format cannot be used as a source tape 
for dubbing through the SDTI (QSDI) or i.LINK 
interface.
• Regardless of the audio recording mode setting of this 
unit, dubbing is performed with the original audio 
recording mode unchanged (two-channel/48 kHz mode 
or four-channel/32 kHz mode).
• Approximately the last 2 minutes of the tape may not be 
copied because of differences in tape lengths. (If an 
index picture is recorded in this portion, it may also not 
be copied.)
• A continuous recorded section of approximately 5 
seconds is required before the recording start point. It is 
recommended to record beforehand color bars or a 
similar signal at the start point of the source tape to be 
dubbed on this unit.
Connections for dubbing via SDTI (QSDI) 
interface
To carry out dubbing through the SDTI (QSDI) interface, 
connect the REMOTE and SDTI (QSDI) IN/OUT 
connectors on this unit to those on the DSR-85/85P/80/
80P/60/60P/70/70P/2000/2000P/1800/1800P/1600/
1600P/1500/1500P.
For details of the connections and switch settings, see 
“Connections for SDTI (QSDI) Dubbing” on page 89.
Connections for dubbing via i.LINK interface
To carry out dubbing through the i.LINK interface, 
connect the i.DV IN/OUT connectors on this unit and the 
player.
Use the following procedure.
1
Press the MENU button in the menu control section.
2
Press the f or F button to select “AUTO 
FUNCTION.”
MENU
RESET(NO)
SET(YES)
TC
PRESET
2,4
1,9
2
3,4,5
7
Setup menu
SYSTEM MENU
SETUP MENU
AUTO FUNCTION
HOURS METER
Monitor screen
Time counter display
Auto func
SYSTEM MENU
SETUP MENU
AUTO FUNCTION
HOURS METER
Monitor screen
Time counter display