Sony SRW-5500 User Manual

107

5-3 Preparing for Playback

  Chap

ter
 5

  Rec

o

rd

ing/

Pla

y

b

a

c

k

Before starting playback, set the switches and menus as 
shown in the diagram below.

Press the PB LEVEL button at the upper left of the 
control panel to enter the PB LEVEL adjustment 
mode.

A vertical blue line appears at the right of the audio 
level meter for each channel, indicating the PB 
LEVEL adjustment mode.

Press the button for the channel for which you want to 
carry out the adjustment (common with MONITOR 
R), to make the channel active. 

An orange border appears around the audio level 
meter, indicating that it is active.

Make the adjustment, using the MULTI CONTROL 
knob or cursor buttons.

To escape from the PB LEVEL adjustment mode
Press the PB LEVEL button at the upper left of the control 
panel once more. The vertical blue line at the right of the 
audio level meter for each channel disappears or turns 
white.

To output at the preset level (for a level recorded 
at reference 0 dB, outputting at +4 dBm)
In the PB LEVEL adjustment mode, make the channel 
active, then press the MULTI CONTROL knob. The 
setting becomes the preset value. Press once more to return 
to the immediately previous value. Pressing once more 
again to return to the preset value. You can also return to 
the preset value with the cursor center button. When you 
exit the PB LEVEL adjustment mode, a vertical white line 
on the right of the audio level meter is not displayed.

MONITOR SELECT buttons:  Audio 
channels to be monitored 

POWER switch:  ON

PB level controls:  
Playback level

Menu settings
[F1] (TIMER SEL) button in the TC menu:  Select the time data to be displayed.

REMOTE buttons:  None of 
these buttons light up.