Marantz SA8003 User Manual

Names aNd FuNctIONs

BasIc

cONNectION

BasIc

Opera

tION

adV

aNced

cONNectIONs

remOte cONtrOller

Opera

tION

trOuBlesHOOtING

OtHers

applIca

tION

Opera

tION

ENGLISH

applIcatION OperatION (cd OperatION)

With the sequence described in step 2

above, program another track. Repeat that
sequence to program all the tracks you
want. You can program up to 30 tracks.

(Example: The 7th track is chosen and total

length of 7th and 15th is 7min50sec)

Total programmed

number

Total playing time of

programmed tracks

Press 2 button to starts playback in

programmed order.

Note:

Repeat Play, Random Play, and AMS Play cannot
be conducted while the unit is in PROGRAM mode
(i.e. when the PROG indicator is lit).

tO cHecK tHe prOGrammed

tracKs

CLEAR

tO delete a prOGrammed tracK

Press CLEAR button in stop mode when

program has been made (When “PROG”
indicator is lighting up).

Every time press CLEAR button, the

programmed tracks are deleted in order
from the last track programmed.

tO clear WHOle prOGram

Press

7 STOP button two times while in program

play. In the stop mode, press

7 STOP button once.

Program can also be cleared by pressing

0 OPEN/

CLOSE button to open the disc tray.

tO add tracKs tO prOGram

Tracks can be added to the end of program when

program is remaining (“PROG” indicator is lighting

up) and in stop mode.

please Be careFul aBOut tHe FOllOWING
matters

• When programming 1st through 9th tracks in a

disc that has over 10 tracks by using numeric

buttons. For instance, programming the 3rd track

after programming the 1st track, press 3 button

more than approximately 1.5 seconds after 1

button is pressed. When a program is finalized,

the time is updated.

• Likewise, when programming a track at 10th or

after. For example, to program 13th track, press 3

button within approximately 1.5 seconds after 1

button is pressed.

• When programming a track in a disc that has less

than 9 tracks. For instance, to program the 5th

track after 4th track has been programmed, press

5 button more than approximately 0.5 second

after 4 button is pressed.

searcHING YOur FaVOrIte

tracKs (ams (autOmatIc

musIc scaN) plaY)

AMS

This feature is convenient for searching where your

favorite track is.

If the AMS button is pressed while a track is

stopped, the PLAY indicator “2” flashes, and the

first ten seconds of each track on the disk will be

played starting from the first track.

Also, if the AMS button is pressed during playback,

the PLAY indicator “2” flashes, and the program

jumps to the next track after approximately

10 seconds elapses on the display time.

Once you find a song that you want to listen to,

press the AMS button again or press the 2 button.

The PLAY indicator lights up and normal playback

resumes from the current track.

Note:

AMS Play cannot be conducted while the unit is in
PROGRAM mode.

sWItcHING sOuNd mOde

(super audIO cd)

Please set Start Sound Mode to “SA-CD” (see

page 16).

S.MODE

Press S.MODE button in stop mode (not

playing).

The currently selected layer or area is

shown on the display. (CD or Super Audio
CD)

If S.MODE button is pressed again, a

playable layer or area will be shown, and
the layer or area will be switched to new
one.
• When layer or area is switched, TOC will

be read again.

• The sound mode cannot be changed for

Audio CDs and discs with only a Super
Audio CD area.

• The sound mode on hybrid layer discs

will be changed in the following order.

Super Audio CD stereo area

CD layer

Press the S.MODE button during playback.

The currently selected layer or area is

shown on the display. (CD or Super Audio
CD)

If S.MODE button is pressed again, the

playback is stopped, and the layer or area
will be switched to new one.

When you want to listen at that area,

press 2 button again. The playback will be
started.