Sony SLV-ED817TH User Manual
8
Getting Started
Step 4
Tuning your TV to the VCR
If you have connected your VCR to the TV using the audio/video cable, skip
this step.
this step.
PROGRAM +/–
RF CHANNEL
?/1
ON/STANDBY
1
Press ?/1 ON/STANDBY to turn on the VCR.
2
Press RF CHANNEL on the VCR.
The factory-preset RF channel flashes in the display window for
about three seconds. (RF32 is for SLV-ED818ME/SG and ED616ME/
MJ/SG and RF51 is for SLV-ED915PS/TH, ED817TH/ED815PS and
ED515PS)
about three seconds. (RF32 is for SLV-ED818ME/SG and ED616ME/
MJ/SG and RF51 is for SLV-ED915PS/TH, ED817TH/ED815PS and
ED515PS)
Press RF CHANNEL again while the RF channel is flashing.
The VCR signal is output through this channel to the TV.
3
Turn on your TV and select a programme position for the VCR picture.
This channel will now be referred to as the video channel.
Some TVs reserve a programme position, such as “0”, for a VCR. In
this case, select the reserved programme position for the VCR
picture. Refer to your TV’s instruction manual for details.
this case, select the reserved programme position for the VCR
picture. Refer to your TV’s instruction manual for details.
ON/STANDBY
RF CHANNEL
SP
APC
e.g. SLV-ED915PS/TH