Vidikron VP-5000VHDA User Manual

Miscellaneous: Select Miscellaneous from the Service menu to set the following options: 

• Language: Select Language from the Miscellaneous menu and press the up- or 

down-arrows to select the OSD language. (Currently, only English is supported.) 

• Menu  Mode:  This is the manner in which the OSD menus appear and disappear when you 

press MENU. Choose one of the following: 

0 = No transition; menus abruptly appear and disappear. 

 

1 = Menus fade in and out. 

 

2 = “Checkerboard” dissolve; menus appear and disappear in sections. 

 

3 = “Window shade” effect; menus are drawn on a diagonal from top left to bottom right, 
and retract in the opposite direction. 

• Timeout - Short/Long: These settings control how long the OSD menus stay on screen. 

Select a time-out period of from 2 to 60 seconds. 

• Side Bar Color: This controls the color of the inactive image area. The range is from -100 

(black) to 100 (white). 

 

 
The inactive image area is on either side of the active image area when using the Standard 
4:3 aspect ratio (or the entire screen when no incoming video signal is present). 

 

• Film  Mode:  Enable Film Mode to smooth out moving images from interlaced, 

standard-definition (SD) sources. In most cases, the PlasmaView VHD detects the proper 
“pull-down” rate and vertical frequency. However, if your source is jittery and/or tearing 
you may wish to enable Film Mode to ensure stable processing for that source. 

System Reset: To reset ALL VHD Controller settings (including image settings) back to their 
factory defaults, choose System Reset from the Service menu. 

A confirmation message appears, reminding you to save your settings before you perform 
the reset, so that you can restore them afterwards. If you have done this, select Confirm to 
continue with the reset. Otherwise, click Back to cancel. 

 

Restore Saved Settings: Following a System Reset, select Restore Saved Settings to apply all 
previously-saved settings to the PlasmaView VHD and VHD Controller.