JVC HR-XVC33UC User Manual

Masterpage:Right-No-Heading

Filename [XVC33U_07S-VHS.fm]

Page 37

22 July 2003 3:07 pm

Enter the channel position.

Press CH +/–.

Set the tape speed.

Press SP/EP.

Return to the normal screen.

Press PROG. or OK. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears. If “PROGRAM NOT COMPLETED
PROGRAM OVERLAP” appears on the TV screen, see
page 40.

● Repeat steps B – H for each additional program.

Engage the unit’s timer mode.

Press TIMER. The unit turns off automatically and “#”
appears on the front display panel.

● To disengage the timer mode, press TIMER again.

To Timer-Record Weekly Or Daily Serials:

— anytime during steps

C through G, press WEEKLY (number

key “9”) for weekly serials or DAILY (number key “8”) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the TV screen. Pressing the button again makes the
corresponding indication disappear.

NOTES:

● You can program this unit to timer-record as many as 8

programs. If you try to program the unit to record a ninth,
“PROGRAM FULL” appears on the TV screen. To record the
extra program, you must first cancel any unnecessary
programs. (

墌

pg. 39)

● In case of a power failure after programing, the unit’s memory

backup keeps your selections for approximately 5 seconds.

● Programs that start after midnight must have the next day’s

date.

Cable Box or DBS Receiver Users

To timer-record a satellite broadcast using Express Timer
Programing:

A Perform steps A – I. Enter “F-1” for the channel position

in step

B Set the DBS receiver to the appropriate channel before

the selected program begins.

C Leave the DBS receiver’s power on.

XVC33U_01.book Page 37 Tuesday, July 22, 2003 3:20 PM