JVC HR-S8965EK User Manual
advanced features
50
Editing
L-1 OUTPUT/INPUT Setting
The
AV1 (L-1) IN/OUT
connector accepts and delivers either a composite signal
(regular video signal) or a Y/C signal (a signal in which the luminance and
chrominance signals are separated). Set
chrominance signals are separated). Set
L-1 OUTPUT
and
L-1 INPUT
to the appro-
priate mode depending on the type of unit connected to the rear panel
AV1 (L-1)
IN/OUT
connector of this VCR.
get to the output/input set screen
Press m. Move the highlight bar to
OUTPUT/INPUT SET
using the A and B buttons and press
OK
3
/
(or E).
select mode
Move the highlight bar to
L-1
OUTPUT
or
L-1 INPUT
using the A and B
buttons. Press
OK
3
/
(or E) to select the
desired mode:
FOR L-1 OUTPUT
•
VIDEO
: If a connected device’s input is
compatible only with regular
video signals, set to
video signals, set to
VIDEO
.
•
S-VIDEO
: If a connected device’s input is
compatible with Y/C signals, set to
S-VIDEO
. This setting will let you take advantage of higher-quality
S-VHS pictures. (For connection, be sure to use a 21-pin SCART
cable that is compatible with the Y/C signal.)
cable that is compatible with the Y/C signal.)
FOR L-1 INPUT
•
VIDEO
: If a connected device’s output is compatible only with regular video
signals, set to
VIDEO
.
•
S-VIDEO
: If a connected device’s output is compatible with Y/C signals, set to
S-VIDEO
. This setting will let you take advantage of higher-quality
S-VHS pictures. (For connection, be sure to use a 21-pin SCART
cable that is compatible with the Y/C signal.)
cable that is compatible with the Y/C signal.)
return to normal screen
Press m.
NOTES:
• I f
L-1 OUTPUT
is set to
S-VIDEO
, it is impossible to set
L-1 INPUT
to
S-VIDEO
.
[1] a k
[MENU]: EXIT
[MENU]: EXIT
OUTPUT/INPUT SET
L-1 OUTPUT
VIDEO
L-1 INPUT
VIDEO
L-2 SELECT
A/V
L-2 INPUT
VIDEO
F
HR-S8965EK-EN/p31-54
4/19/03, 01:16 PM
50