JVC HR-VP658U User Manual
EN
45
EDITING
Edit To Or
From Another
VCR
You can use your VCR as the player or the recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the player’s VIDEO OUT
and AUDIO OUT connectors and the recorder’s VIDEO
IN and AUDIO IN connectors.
and AUDIO OUT connectors and the recorder’s VIDEO
IN and AUDIO IN connectors.
● When using your VCR as the recorder and a monaural
VCR as the player, connect the player’s AUDIO OUT
connector to the AUDIO IN L connector on the recorder.
connector to the AUDIO IN L connector on the recorder.
LOAD CASSETTES
2
Insert the playback cassette into the player and the
cassette to be recorded on into the recorder.
cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Set to "AUX". With this VCR, press the NUMBER key "0"
and/or CH to select depending on the connector being
used – "L-1" for the rear AUDIO/VIDEO IN connector,
or "F-1" for the front AUDIO/VIDEO IN connector.
and/or CH to select depending on the connector being
used – "L-1" for the rear AUDIO/VIDEO IN connector,
or "F-1" for the front AUDIO/VIDEO IN connector.
START PLAYER
4
Set to its play mode.
NOTE:
If the player is equipped with a superimpose/OSD
disable feature then set "SUPERIMPOSE" to OFF before
pressing PLAY (
disable feature then set "SUPERIMPOSE" to OFF before
pressing PLAY (
Z
pg. 28).
START RECORDER
5
Set to its record mode.
4
5
6
7
8
9
0
4
1
3
NOTE:
If you use this VCR as the playback deck for editing, be sure to
turn off R
turn off R
3
Picture before starting (
Z
pg. 26).
CH
PLAY
PLAY
CH
NUMBER "0"
Recorder
Another VCR
AUDIO IN
Audio/Video cable
(not supplied)
VIDEO IN
Player
Your VCR
VIDEO OUT
AUDIO OUT