JVC HR-S9600EU User Manual

This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."

ACCESS MAIN MENU

SCREEN

Press MENU.

ACCESS MODE SET

SCREEN

Move the highlighted bar (pointer) to "MODE SET" by

pressing 

%fi, then press OK or 

#

.

SELECT PICTURE

CONTROL SET MODE

Move the highlighted bar
(pointer) to "PICTURE
CONTROL" by pressing

%fi, then press OK or 

#

 to

select the desired mode.
AUTO: Provides

optimised picture
benefits of B.E.S.T.
Picture System.
Normally select
AUTO.

EDIT:

Minimizes picture degradation during editing
(recording and playback).

SOFT: Reduces image coarseness when viewing

overplayed tapes containing a lot of noise.

SHARP: Clearer, sharper-edged picture when viewing

images with lots of flat, same-coloured surfaces
such as cartoons.

●

When you select EDIT, SOFT or SHARP, the selected

mode will not change until you select again.

●

When you select EDIT to dub tapes, be sure to select

AUTO after you finish dubbing the tapes.

RETURN TO NORMAL

SCREEN

Press MENU.

●

When B.E.S.T. is OFF, "PICTURE CONTROL" switches
automatically from AUTO to NORM.

●

Select EDIT when you are dubbing tapes. Refer to page 42.

B. E. S. T.

=LP TIMER OFF

5∞] = 

You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.

● From VHS to S-VHS: Record VHS playback signals in the

S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.

● From S-VHS to VHS: Because the picture quality of the

source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.

● From S-VHS to S-VHS: All signals will be transferred with

minimum degradation.

Turn on the TV and select the VIDEO channel (or AV mode).

1

2

3

4

5

6

7

8

9

1

2

3

4

1

2

3

4

0