JVC HR-S7851EU User Manual

Filename [HRS7850EU3.fm]

Masterpage:Left

Page 42

April 13, 2001 2:57 pm

EDITING

Edit From A
Camcorder

You can use a camcorder as the source player and your
recorder as the recording deck.

Make connections.

A If the camcorder has no S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and VIDEO
OUT connectors to the recorder’s front panel AUDIO
and VIDEO input connectors.

B If the camcorder has an S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and
S-VIDEO OUT connectors to the recorder’s front panel
AUDIO and S-VIDEO input connectors.

● When using a monaural camcorder, connect its AUDIO OUT

connector to the AUDIO L input connector on your recorder.

● When a Master Edit Control-equipped JVC camcorder is used,

the camcorder is capable of controlling the recorder. Refer to
the camcorder’s instruction manual for operating procedure.

Set the recorder’s input mode.

Press AUX (number key “0”) and/or PR to select “F-1” for
the AUDIO and VIDEO input connectors, or “S-1” for the
AUDIO and S-VIDEO input connectors, depending on
the connectors being used.

Set the edit mode.

See “PICTURE CONTROL” on page 55.

Start the camcorder.

Engage the Play mode of the camcorder.

Start the recorder.

Engage the Record mode of the recorder.

NOTES:

● All necessary cables can be obtained from your dealer.

● When you select “EDIT” to dub tapes in step 3, be sure to

select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.

If the camcorder has no S-VIDEO output connector ...

If the camcorder has an S-VIDEO output connector ...

Recorder

AUDIO OUT

VIDEO OUT

Camcorder

AUDIO
input

Player

VIDEO
input

EDIT

Video cable (not provided)

Mini-plug cable
(not provided)
(JVC camcorder
only)

To rear panel PAUSE
connector

Recorder

Audio cable (not provided)

S-VIDEO OUT