JVC HR-J668EU User Manual

1

2

3

4

5

6

7

8

9

0

2

4

1

3

SET TAPE SPEED

Press SP/LP (

) to set the tape speed.

SET VPS/PDC MODE

Press VPS/PDC to select "ON" or "OFF".
If "VPS/PDC  ON" is displayed on the screen or "VPS/

PDC" is lit on the display panel, VPS/PDC is set to ON.

If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"

is not lit on the display panel, VPS/PDC is set to OFF.

Z

 "VPS/PDC Recording" on page 25.

RETURN TO NORMAL SCREEN

Press PROG or OK. "PROGRAM COMPLETED" appears

on the screen for about 5 seconds, then normal screen
appears.

● Repeat steps 1 – 6 for each additional programme.

ENGAGE RECORDER’S TIMER MODE

Press ‰ (TIMER). The recorder turns off automatically

and ‰ appears on the display panel.

● To disengage the timer, press ‰ (TIMER) again.

● To Change The Stop Time . . .

. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays this
way.

● To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday – Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.

● You can programme this recorder to timer-record as many as 8

programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen and "FULL" appears
on the front display panel. To record the extra programme, you
must first cancel any unnecessary programmes (

Z

 pg. 26).

● It is not possible to timer-record a TV programme with a

S

HOW

V

IEW

 number which starts with "0".

"GUIDE PROG SET" appears after performing step 3 if the
Guide Program number for the S

HOW

V

IEW

 number you

entered has not been set.

● Press the NUMBER keys or %fi to input the channel

position number on which your recorder receives that
station, then press OK or 

#

 to set the Guide Program

number. The S

HOW

V

IEW

 program screen appears.

(Ex.) To timer-record a ZDF
programme with S

HOW

V

IEW

.

* If your recorder receives

ZDF on the channel
position 2, press OK or 

#

after entering "2".

To timer-record a satellite broadcast using S

HOW

V

IEW

:

1 Set "AV2 SELECT" to "AV2" (

Z

 pg. 31).

2 Perform steps 1 – 7.
3 Set the satellite tuner to the appropriate channel before

the selected programme begins.

4 Leave the satellite tuner's power on.

5∞] = 

If you have programmed your
recorder to timer-record a
programme or a series of
programmes, a warning
appears on screen to tell you
that the recording is to start in
5 minutes.

● The warning only appears if

you’re not in the Timer mode at that time.

● If this recorder is being used as the player for tape

dubbing, the warning screen is recorded on the tape in
the other video recorder.

The warning blinks for the entire 5 minutes leading up to
the start of timer recording. To clear the display, press  .