A&D EJ-3000 User Manual

 33

 
2.   CC 0    is displayed. 
 
3. If necessary to change the weight value to check, press the   SAMPLE   key and 

change the weight value using the following keys. 

 

  SAMPLE    key 

To select the digit blinking to change. 

  RE-ZERO    key  To set the value of the digit selected.   

  PRINT    key 

To store the value and return to step 2. 

 
4. At step 2, press the    PRINT    key. The zero point 

is weighed and the weighed value is displayed for a 
few seconds. 

 
 
 
 
 
 

 
 
 

5. Place the displayed weight on the pan and press 

the  

 PRINT  key to weigh it. The weighed value is 

displayed for a few seconds. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
6.   end     appears. 
 
 
7.   glp      is displayed and calibration test report is 

output. 

 
 
8.   end     appears again. Remove the weight and 

press the  MODE  key to return to the weighing 
mode. 

 
 
 

  CC  0 

     0.0 

  CC  0 

The weighed data

is shown with “g”.

With nothing 

on the pan 

  2000.0 

  2000.0 

  2000.0 

Displayed 

weight 

 end 

 end 

The weighed data

is shown with “g”.

Returns to   

the weighing mode 

  glp 

GLP output