Taylor TE10C User Manual

4

You may wish to weigh ingredients in a bowl or other con-
tainer (not included). In this case, you will need to tare, or 
offset, the weight of the bowl so that only the weight of the 
ingredients is displayed. 

1. While the scale is on, place the empty container on  

the platform. Press the “TARE/ZERO” button. The weight 
will reset to zero. 

2. Place the item in the container. The weight of the item 

alone will display.

3. To weigh additional items in the same container, continue 

to press “TARE/ZERO” to tare out the weight of each  
new item.

4. When weights have been tared out, the LCD will show  

a negative number when the weight is removed from  
the scale. To reset the scale back to zero, press the  
“TARE/ZERO” button. 

This scale operates on an AC adapter (included) or one 
9-Volt alkaline battery (not included).

To power the scale using the adapter, insert the connector 
plug into the jack at the back of the scale, and plug the 
other end into the proper electrical outlet.