Intermate AS/400 User Manual

User’s Manual for InterForm400®   

The service functions are accessed by selecting option 12 on the administration menu:

          Service Functions                                          APF900D     

                                                                      

 Select one of the following options:                              

  1. Create Demo Spool Entry                                                 

                                                     

  5. Display all displayable characters                                     

  6. Save spooled file to the folder APF3812                                

  7. Print Saved file to the folder APF3812                                    

  8. Print Resource X-reference

  9. Journal menu

 21. Export of InterForm 400 resources                                          

 22. Import of InterForm 400 resources                                            

                                                               

 40. Install/upgrade InterWord  400                                           

 50. Apply PTF from folder APF3812                                              

 60. Install SwiftView at drive C:       

 70. Install InterForm Designer on your PC            

 80. Prepare server to support InterForm Designer    

                                                  

 Option: __                                                        

                                                                  

 F3=Exit                 F6=Display messages                      F12=Cancel    

                                            

If you want to study the Auto Forms Control sample delivered with this program, this
option will create a spool entry in a format which could have been the output from a
common AS/400 application.

          Create Demo Spooled File                                    SMP001D   

 

 This program will print a demo spooled file in the APF3812/AFC_INPUT1 outq.

 The printout is intended for being merged with the IF400DEMO overlay from the

 file-set SAMPLE.

 

 If the AUTO_FORM subsystem is started, the merge operation is carried out

 automatically by Auto Forms Control.

 

 Output from the merge operation will be placed in the APF3812/AFC_OUT1 outq,

 from where it can be printed on a HPIII or similar PCL5 printer.

 

 Before the AUTO_FORM subsystem is started for the first time, you must call

 the APF3812/AFCINSTALL program. The subsystem is then started with this 

 command:   STRSBS APF3812/AUTO_FORM

 

 

 

 

  Press Enter to create the printout 

 

 

  F3=Exit                                                         F12=Cancel  

 

You can create the same spool entry several times, which gives you the possibility to
experiment with different attributes for the spool entries (SAVE=*YES/*NO, formtype
change etc.)