Intermate i5 User Manual
436
User’s Manual for InterForm400
®
The Work with Charts command, WRKCHT
When using the Work with Charts command, APF3812/WRKCHT, the following display is
shown:
shown:
Work with Chart definitions CHA100D
Position to . . . . . . _____________ Chart
Type options, press Enter.
2=Change 3=Copy 4=Delete 5=Display 6=Print chart
Opt Chart Description
_ DEMOSALES Demo of Bar chart
_ SAMPLEBAR Sample bar chart
_ SAMPLELINE Sample line chart
End
F3=Exit F5=Refresh F6=Create F11=View 2 F12=Cancel
Pressing F11 will result in an alternative display as seen below, where the size of the
charts is displayed. Status is *PARTIAL if the setup of the chart is not complete.
charts is displayed. Status is *PARTIAL if the setup of the chart is not complete.
Pressing F11 again will alternate between the two displays.
Work with Chart definitions CHA100D
Position to . . . . . . Chart
Type options, press Enter.
2=Change 3=Copy 4=Delete 5=Display 6=Print chart
Opt Chart Type Chart heig Chart widt Status
_ DEMOSALES *BAR 4,000 4,000
_ SAMPLEBAR *BAR 4,000 4,000
_ SAMPLELINE *LINE 7,000 7,000 *PARTIAL
End
F3=Exit F5=Refresh F6=Create F11=View 2 F12=Cancel
If a chart is complete, it is possible to printout the chart using option 6. Print chart. The
chart will be printed out on the default output queue for the current job.
chart will be printed out on the default output queue for the current job.