Intermate iSeries User Manual

User’s Manual for InterForm400

3=VERTICAL LINE

Seqnbr. Type Inch.pel Repetition

1 3 Vertical line

From top edge ______ Move right ______

From left ______ Move down ______

Lower end ______ Extra times ___

Thickness in pels ___

F3=Exit F12=Cancel F18=View Spool entry

From Top
Edge:

Inches, pels absolute to the upper edge of a portrait page regardless of
the rotation specified by the global settings for the overlay.

From left:

Inches, pels absolute to the left edge of a portrait page regardless of the
rotation specified by the global settings for the overlay.

Lower end:

Inches, pels absolute to the upper edge of a portrait page regardless of
the rotation specified by the global settings for the overlay.

Thickness
in pels:

Thickness of a the line in pels (1/240"). Zero means no border.

Move right:

Inch,pels of the right movement of a duplicate of the line relative to the
value for left edge

Move Down:

Inch,pels of the vertical movement of a duplicate of the line relative to the
value for Top edge

Extra times:

Extra copies of the line excluding the original. Extra copies will be
displaced relative to each other according to the settings of Move right
and Move Down.

4=LINE

Seqnbr. Type Inch.pel Repetition

n,0 2 Line

Endpoint 1 from top ______ Move right ______

from left ______ Move down ______

Endpoint 2 from top ______ Extra times ___

from left ______

Thickness in pels ___

F3=Exit F12=Cancel F18=View Spool entry

This definition works similar to the two previous definitions. It distinguish itself by enabling
lines to be diagonal. This also means you will have to define coordinates for each
endpoint.

Endpoint 1

From Top:

Inches, pels absolute to the top edge of a portrait page
regardless of the rotation specified by the global settings for the
overlay.

From left:

Inches, pels absolute to the left edge of a portrait page
regardless of the rotation specified by the global settings for the
overlay.