Hobart HBR300 User Manual

Bench Receiving Scale

Refer to the specific section for a further explanation of each
step.

To operate the scale:

1. PRESS 

ON

OFF

 to turn the scale on.

2. Access Setup Mode to preset tare and set upper and

lower limits if desired.

3. Access Operator Mode to operate one-touch tare, weigh

products, and weigh items in batches. REFER to page 14.

4. Access Setup Mode to clear or change preset tare or

upper and lower weight limits if desired.

5. PRESS 

ON

OFF

 to turn the scale off.

✎

Upper and lower weight limits remain in memory unless
batteries are removed or cord is unplugged.

☛

If at any time an incorrect weight displays, verify that your

desired unit of weight (lb or kg) indicator is lit, PRESS 

lb

kg

to change the unit of weight.

Access Setup Mode to set, clear, or change preset tare and
upper and lower weight limits.

Preset the tare if you know the package weight (tare value).

☛

If you want to preset tare but do not know the tare value,
weigh the package or container. The weight displayed is the
tare value. Follow the steps below to preset tare.

To preset tare:

1. HOLD DOWN 

 and PRESS 

TARE

. The tare indicator

and last digit on the display flashes.