Hobart HBR300 User Manual
Bench Receiving Scale
15
Weighing in Batches
Weighing in batches allows you to add ingredients and
return the weight back to zero repeatedly by pressing Tare
to control the weight of each added ingredient type.
return the weight back to zero repeatedly by pressing Tare
to control the weight of each added ingredient type.
To batch:
1. Place the container on the scale platter. The container
1. Place the container on the scale platter. The container
weight displays.
2. PRESS
TARE
to make the display show 0.0.
3. Add the ingredient until the desired portion displays as
the weight.
4. Repeat steps 2 and 3 for each ingredient you wish to add.
5. When done, remove the container filled with your
5. When done, remove the container filled with your
ingredients from the scale platter. The total negative tare
weight (container and ingredients) displays.
weight (container and ingredients) displays.
6. PRESS
TARE
to clear tare value.
☛
Note
When weighing in batches, PRESS
NET
GROSS
at any time to
display the total weight of the items. Press again to return to
the weight of the individual item.
the weight of the individual item.
Cleaning and
Maintaining the Scale
Maintaining the Scale
Proper cleaning and maintenance prolongs the life and
productivity of the scale. Clean the scale as needed.
productivity of the scale. Clean the scale as needed.
Cleaning
To clean the scale:
1. Dampen a soft cloth with mild detergent and water
1. Dampen a soft cloth with mild detergent and water
solution.
2. Wipe down the scale housing and platter.
CAUTION — Look At This
DO NOT
splash or hose down the scale. If water gets into
the display it will blank out, or the weight will be unstable.
Open the display and allow it to dry.
Open the display and allow it to dry.
DO NOT
use solvents to clean the scale.