Hobart ML-29032 User Manual
Quantum Scale System
Start a Run Screen
4 - 2
Understanding and
Using the Start a Run
Screen
Using the Start a Run
Screen
This section will provide you information on the following:
♦
Overview of the Start a Run Screen, including sections
and keystrokes
and keystrokes
♦
Understand the differences between each Weigh Type
on the Start a Run Screen
on the Start a Run Screen
♦
Understand the differences between each Totals Type on
the Start a Run Screen
the Start a Run Screen
♦
Select Weigh and Totals Types
♦
Verify Zero Weight
♦
Rezero the scale if Zero Weight not displayed
♦
Determine if Operator ID’s are required for your system
♦
Overview of the Run Screen, including sections and
keystrokes
keystrokes
♦
Three (3) different ways of entering PLU information
Start a Run Screen
Overview
Overview
The Start a Run Screen is divided into several sections:
♦
Date/Time (explained earlier in this manual)
♦
Weight Display
♦
Weigh Types
♦
Totals Types
♦
Operator ID (If enable during Scale Set-up...See Note)
The following lists the keystrokes you can use to move
around on the Start a Run Screen:
around on the Start a Run Screen:
♦
To move the cursor use the UP ARROW (▲) and DOWN
ARROW (▼) Keys.
ARROW (▼) Keys.
♦
To move the cursor between Weigh type and Total type,
use the LEFT ARROW ( ) and RIGHT ARROW ( )
Keys.
use the LEFT ARROW ( ) and RIGHT ARROW ( )
Keys.
♦
The “active” column is shown in Reverse Video (White
letters on a Black field).
letters on a Black field).
PRESS [ENTER] to select the task.