Escali Digital Kitchen Scale User Manual

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

   

 

Please read the following operation information to ensure the 
proper function of your new scale. 

 

Your scale is equipped with one easy to use all feature operating button. 
This button is located on the front of the scale, right from the display. With 
this button, you control all normal operating features; On, Off, and Tare. 

1)  Turn the scale on. All display segments will appear for approximately 2 

seconds before resetting to zero. 

2)  Place item gently on the platform. 

This feature allows the display to be reset to zero after you weigh an item 
in a container or bowl. It shows the weight of additional items as if you 
were to weigh them separately. 

 

1)  Turn the scale on. 
2)  Place the container, without the item, gently on the platform. 
3)  Press the operating button, and the weight of the container will be 

removed. The display value will reset to “0g/0oz”. 

4)  Gently add the item to the container.  The display will show the weight 

of the item only. 

5)  Repeat step 3 and 4 when adding more items to the container. 

 
How to clear the “Tare” feature: 

1)  Remove all items from the platform. 
2)  Press the operating button, and the display value will reset to “0g/0oz”. 
3)  The scale is reset. You can continue with normal operating. 

 
 

 

1)  Make sure your scale is at room temperature and on a stable 

horizontal surface free of vibration 

2)  This scale is not waterproof. Do not expose to moisture 
3)  As this scale is a precision instrument, it must be handled with 

extreme care. Avoid rough treatment, shaking or vibration 

4)  Do not disassemble this scale or the warranty will be void 
5)  The display value may be affected by electromagnetic disturbances 

such as operating near a radio. If this occurs, move the device that is 
causing the disturbance and turn the scale off and restart.  

 

Replace the batteries when the LCD display reads “bAtt”.  
1) Remove the battery door 
2) Install two new 3-volt lithium batteries 
3) Replace the battery door.

 

 

 

 
 

 

Escali’s liability is limited to two (2) times the cost of the product 

 
 
 

 

© Copyright Escali LLC, 2004 

 
 

 

 

TM

 

User Manual 

 

 

 

 

A

RGENTA 

Digital Kitchen Scale

 

 

www

.Escali

.

com

 

 

Turning off your scale: 

Your scale will automatically turn of after 2 minutes of non-use. You 
can also manually turn of the scale by holding the Operating button 
down for approximately 3 seconds. 

 
Changing the Weighing Mode: 

Your scale can weigh Pounds/Ounces or Grams. You can simply 
change the weighing mode before you operate the scale.  

 

1)  Turn the scale on. 
2)  Press the Kg/Lb switch located on the bottom of your scale to 

change to Pounds/Ounces or Grams. 

3)  Your scale will keep the last used weighing mode in memory and 

will return automatically to this mode when you turn the scale on. 

Weighing items over the maximum weight capacity will cause an 
overload “EEEE” error to display.  Immediately remove overweight 
items to avoid causing damage to your scale.

   

 
Power Source:   two 3-volt lithium batteries 
Dimensions

:   

7.5" x 6" x 1.5" (19.5cm x 16cm x 4cm) 

Graduation:  

⅛ oz. < 2 Lb, ¼ oz > 2 Lb 

 

 

2 gr. < 1 Kg, 5 gr. > 1 Kg. 

5 Lb / 2000 Gram 

Weight Modes:   Pounds/Ounces or Grams

 

Auto Shut Off:   Turns off after 2 minutes of non-use

.

 

 

Warranty: 

Manufacturer’s five (5) year warranty, see 

www.escali.com for full details.