Timex w-215 User Manual
3
W-215
www.timex.com
CHRONOGRAPH
This mode provides a chronograph (stopwatch) function. Press MODE to go to
Chrono mode.
To start, press START/SPLIT. Chrono counts up by hundredths of a second up
to one hour, then by seconds up to 100 hours. Stopwatch icon w flashes to
indicate chrono is running.
To stop, press STOP/RESET. Stopwatch icon w freezes to indicate chrono is
stopped.
To resume, press START/SPLIT, or to reset (clear) chrono, press and hold
STOP/RESET.
When chrono is already running, chrono continues to run if you exit mode.
Stopwatch icon w appears in TIME mode.
While chrono is running, press START/SPLIT to take a split. Lap and split times
will be displayed with lap number.
To set display format, press SET. Then, press + or – to select desired format.
Press DONE to exit.
NOTE: When a split is taken, times are frozen on the display for 10 seconds.
Press MODE to release display and show running chrono immediately.
Chrono mode.
To start, press START/SPLIT. Chrono counts up by hundredths of a second up
to one hour, then by seconds up to 100 hours. Stopwatch icon w flashes to
indicate chrono is running.
To stop, press STOP/RESET. Stopwatch icon w freezes to indicate chrono is
stopped.
To resume, press START/SPLIT, or to reset (clear) chrono, press and hold
STOP/RESET.
When chrono is already running, chrono continues to run if you exit mode.
Stopwatch icon w appears in TIME mode.
While chrono is running, press START/SPLIT to take a split. Lap and split times
will be displayed with lap number.
To set display format, press SET. Then, press + or – to select desired format.
Press DONE to exit.
NOTE: When a split is taken, times are frozen on the display for 10 seconds.
Press MODE to release display and show running chrono immediately.
TIMER
Timer mode provides a countdown timer with alert. Press MODE repeatedly
until TIMER appears.
To set countdown time:
1) Press SET. Hours flash. Press + or – to change hours; hold button to scan
until TIMER appears.
To set countdown time:
1) Press SET. Hours flash. Press + or – to change hours; hold button to scan
values.
2) Press NEXT. Minutes flash. Press + or – to change minutes.
3) Press NEXT. Seconds flash. Press + or – to change seconds.
4) Press NEXT. Action at end of countdown flashes. Press + or – to select STOP
3) Press NEXT. Seconds flash. Press + or – to change seconds.
4) Press NEXT. Action at end of countdown flashes. Press + or – to select STOP
or REPEAT, indicated by hourglass icon with arrow I.
5) Press DONE at any step when done setting.
To start timer, press START/SPLIT. Timer counts down every second from
countdown time. Hourglass icon H flashes to indicate timer is running.
To pause countdown, press STOP/RESET. Hourglass icon H freezes to indicate
timer is stopped.
To resume countdown, press START/SPLIT, or to reset countdown, press
STOP/RESET.
Watch beeps and night-light flashes when countdown ends (timer reaches zero).
Press any button to silence. If REPEAT AT END selected, timer repeats
countdown indefinitely.
Timer continues to run if you exit mode. Hourglass icon H appears in Time mode.
To start timer, press START/SPLIT. Timer counts down every second from
countdown time. Hourglass icon H flashes to indicate timer is running.
To pause countdown, press STOP/RESET. Hourglass icon H freezes to indicate
timer is stopped.
To resume countdown, press START/SPLIT, or to reset countdown, press
STOP/RESET.
Watch beeps and night-light flashes when countdown ends (timer reaches zero).
Press any button to silence. If REPEAT AT END selected, timer repeats
countdown indefinitely.
Timer continues to run if you exit mode. Hourglass icon H appears in Time mode.
HYDRATION
Hydration mode provides a countdown timer with alert to remind you to drink
during a workout. Press MODE repeatedly until HYDRA appears.
To set hydration time:
1) Press SET. Minutes flash. Press + or - to change minutes; hold button to
during a workout. Press MODE repeatedly until HYDRA appears.
To set hydration time:
1) Press SET. Minutes flash. Press + or - to change minutes; hold button to
scan values.
2) Press NEXT. Seconds flash. Press + or - to change seconds; hold button to
scan values.
3) Press DONE at any step, when done setting.
To start hydration timer, press START/SPLIT. Timer counts down every second
from countdown time. Drop icon D flashes to indicate timer is running.
To pause countdown, press STOP/RESET. Drop icon D freezes to indicate timer
is stopped.
To resume countdown, press START/SPLIT, or to reset countdown, press
STOP/RESET.
Watch beeps and night-light flashes when countdown ends (timer reaches zero).
Press any button to stop alert.
Hydration timer continues to run, if you exit mode. Drop icon D appears in
Time mode.
To start hydration timer, press START/SPLIT. Timer counts down every second
from countdown time. Drop icon D flashes to indicate timer is running.
To pause countdown, press STOP/RESET. Drop icon D freezes to indicate timer
is stopped.
To resume countdown, press START/SPLIT, or to reset countdown, press
STOP/RESET.
Watch beeps and night-light flashes when countdown ends (timer reaches zero).
Press any button to stop alert.
Hydration timer continues to run, if you exit mode. Drop icon D appears in
Time mode.
LAP 1 = 7.11
LAP 2 = 7.50
SPLIT 2 = 15.01
LAP 3 = 7.08
SPLIT 3 = 22.09
LAP 4 = 7.30
SPLIT 4 = 29.39
SPLIT 1 = 7.11