Invacare 9000 STANDARD WEIGHT User Manual

7   SEAT AND BACK

1.

Remove the mounting screws that secure the existing seat upholstery to the seat rails.

2.

Remove the existing seat upholstery from the seat rails.

3.

Install new seat upholstery by reversing STEPS 1-2.

FIGURE 1   Replacing Seat Upholstery



After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or 
damage may occur.



The procedures in this section apply to non-recliner models only. For recliner models, refer to Recliner on page 59.



10 and 12 inch seat depth has 8 mounting screws and 14 inch seat depths have 10 mounting screws.

Mounting Screw

Wheelchair Frame

Seat Upholstery

10 or 12-inch Seat Depth

Seat Rail