Invacare 9000 STANDARD WEIGHT User Manual

8   REAR WHEELS

1.

Remove the dust cap (if applicable), mounting screw and locknut 

that secure the rear wheel and axle spacer to the wheelchair.

2.

Repeat STEP 1 for the opposite rear wheel.

3.

To reinstall the rear wheel onto the wheelchair, reverse STEPS 1-2.

FIGURE 1   Removing/Installing Rear Wheels - Permanent Axles



After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or 
damage may occur.



Except where noted, the procedures in this section apply to non-recliner models only. For recliner models, refer to Recliner on page 59.



Only a qualified technician may change the size of the 
rear wheel or the seat-to-floor height.



If replacing the same size rear wheel, note the mounting 
position on the wheelchair frame for proper 
reinstallation of the new rear wheel.

Wheelchair Frame

Axle Mounting Positions

Rear Wheel

Dust Cap

Lock Nut

Axle Spacer

Mounting Screw