Invacare 9000 STANDARD WEIGHT User Manual

12   OPTIONS

1.

Position the solid seat insert so that it is fully supported by the seat rails and the back edge of the solid seat insert is touching the back canes.

1.

Firmly grasp the solid seat insert and lift it away from the seat upholstery.

1.

Position the solid back insert between the back canes.

2.

Wrap the two fastening straps around the back canes. Securely fasten with the two snaps.

1.

Release the two snaps securing the two fastening straps around the back canes and remove the solid back insert.

1.

Remove the existing rubber tip from the wheel lock handle (Detail “A”).

2.

Install the extension handle over the wheel lock handle (Detail “B”).

FIGURE 4   Installing the Wheel Lock Extension Handle



If the wheelchair is equipped with push to lock wheel 
locks, elevating legrests, and wheel lock extension handles, 
the wheel lock extension handles MUST be removed 
before swinging the elevating legrests to the side, 
otherwise injury or damage may result. Interference 
between the top of the elevating legrest and the wheel 
lock extension handle causes the wheel lock to disengage.

Rubber Tip

Wheel Lock 

Handle

Wheel Lock

Wheel Lock 

Extension 

Handle

Wheel Lock 

Handle

Wheel Lock