Invacare EX2 User Manual
SECTION 8—FRONT CASTERS
33
NOTE: For this procedure, refer to FIGURE 8.2.
NOTE: If replacing the same size front caster, note the mounting position on the fork assembly for proper reinstallation of the new front
caster.
NOTE: If replacing the same size front caster, note the mounting position on the fork assembly for proper reinstallation of the new front
caster.
1.
Remove the hex screw, washers and locknut that secure the front caster to the fork.
NOTE: Washers are only used with 6 and 8‐inch casters with precision bearings.
2.
To reinstall the new front caster onto the fork, reverse step 1.
FIGURE 8.2 Replacing Front Casters
Replacing/Repairing Front Caster Tire
WARNING
Replacement of front caster tire MUST be performed by a qualified technician.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and
should be replaced when necessary.
Locknut
Washer (if applicable)
Front Caster
6 or 8-inch Fork
Hex Screw
Washer (if applicable)