Conair CS25 User Manual

Page of 2
IMPORTANT SAFETY 
INSTRUCTIONS
When using electrical appliances, especially when 
children are present, basic safety precautions should 
always be followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING.
KEEP AWAY FROM WATER
DANGER —
 Any appliance is electrically live 
even when the switch is off. To reduce the risk 
of death by electric shock:
1. Always unplug appliance immediately after 
using.
2. Do not use while bathing.
3. Do not place or store appliance where it can 
fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or other 
liquid.
5. If an appliance falls into water, unplug it im-
mediately. Do not reach into the water.
WARNING —
 To reduce the risk of burns, elec-
trocution, fi re, or injury to persons:
1. This appliance should never be left unat-
tended when plugged in. 
2. Do not pull, twist, or wrap line cord around 
appliance.
3. This appliance should not be used by, on or 
near children or individuals with certain dis-
abilities.
4. Use this appliance only for its intended use, as 
described in this manual. Do not use attachments 
not recommended by the manufacturer. 
5. Never operate this appliance if it has a dam-
aged cord or plug, if it is not working prop-
erly or if it has been dropped or damaged, or 
dropped into water. Return the appliance to 
an authorized service center for examination 
and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any open-
ing or hose.
9. Do not use outdoors or operate where aerosol 
(spray) products are being used or where oxygen 
is being administered.
10. Unit is hot when in use. Do not let eyes or 
bare skin touch heated surfaces.
11. Do not place the heated unit directly on 
any surface or on the appliance cord while it 
is hot or plugged in. 
12. Never block the air openings of the appliance 
or place on a soft surface, such as a bed, couch, 
or towel, where the air openings may be blocked. 
Keep the air openings free of lint, hair, and the 
like. Unplug before storing.
13. Do not use an extension cord with this appli-
ance. 
14. Do not touch hot surfaces of the appliance. 
Use handles or knobs.
15. Before plugging in read the information about 
dual voltage contained in the instruction section 
of this manual.
16. Do not attempt to touch the housing of your 
appliance near the straightening plates as it is 
hot when in use.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This straightening iron is intended for house-
hold use. This unit is designed to operate at 
120/240 volts AC. Use on Alternating Current 
(50/60 hertz) only. 
This appliance has a polarized plug (one blade is 
wider than the other). As a safety feature, this plug 
will fi t in a polarized outlet only one way. If the plug 
does not fi t fully in the outlet, reverse the plug. If 
it still does not fi t, contact a qualifi ed electrician. 
Do not attempt to defeat this safety feature.
DUAL VOLTAGE
This straightening iron will automatically adjust 
to the proper voltage. Use an adapter plug with 
correct confi guration, prior to use in outlet.
TO STRAIGHTEN HAIR
Hair should be clean and completely dried before 
using the straightening iron. Plug the iron into an 
electrical outlet. Turn on unit. The power indica-
tor light should become illuminated. Allow unit 
to heat up for several minutes. 
WARNING: The straightening iron’s plates will 
get very hot within a few seconds and should 
not be placed in contact with the skin after 
the straightening iron has been turned on. 
GETTING STARTED
The straightening iron’s 25 temperature settings 
and Instant Heat technology combine to provide 
styling versatility for all hair textures. If you have 
fi ne hair, a low temperature will provide the best 
results. If you have thick, wavy or hard-to-straight-
en hair, keep the heat setting high. You can vary 
the straightening iron’s temperature according 
to your particular need!
STRAIGHTENING BASICS
1. Plug the straightening iron cord into any house-
hold outlet (120/240V, red light to go on). Press 
ON button. The iron will heat up very quickly. The 
green indicator light will stop blinking and remain 
on when the iron is ready to use. To turn off, press 
OFF button (green light will go off). Never leave 
your straightening iron on and unattended.  
How-
ever, should you fail to turn the unit off, it will 
shut itself off automatically within 60 minutes.
2. Start with a hair section that is 2” wide and no 
more than 1/2” thick. Open the iron and place a 
hair section between the two hot plates, close to 
the scalp. Trap hair between the plates by fi rmly 
squeezing the handles together. While maintain-
ing the tension, slowly pull the unit down along 
the hair section toward the end of hair. For best 
results, use a light styling lotion before blow-dry-
ing hair. At the end of hair section, release the 
pressure on the handle and allow the hair section 
to slide out. Repeat process on additional sections 
of hair until you achieve the hair style you desire. 
It may be necessary to repeat process on certain 
areas, depending on the texture of your hair.
Some experience is necessary when learning to 
use this straightening iron. After using iron several 
times, you will learn the ideal way to straighten and 
style your hair easily. 
STYLING WITH THE EASY-GLIDE 
CERAMIC-COATED PLATES
The plates of your new straightening iron have 
an Easy-Glide ceramic-coated surface, the new-
est technology. 
Hair glides easily over the surface of the plates 
as you’re straightening. The ceramic-coated 
surface also helps smooth down fl yaways and 
frizzies. As you smooth each strand, heat is 
evenly distributed so that the style you create 
has a salon-perfect, silky smooth, shining fi nish. 
Hair slips right off the plates after it’s straightened, 
and the ceramic surface is easy to clean.
The new ceramic technology is a pleasure to 
work with because it makes styling your hair 
easier and the results more professional.
USING INSTANT HEAT, THE 25 VARIABLE 
TEMPERATURE SETTINGS AND UNIFORM 
HEAT RECOVERY SYSTEM 
This straightening iron features Conair’s Instant 
Heat technology. 
Within this Instant Heat technology there are 25 
variable temperature settings for every type of 
hair, from the fi nest to the curliest and most re-
sistant. Select the temperature range that’s suit-
able for your hair type to help you create the look 
you want. 
And that’s not all. Conair’s professional salon 
standards of engineering provide you with a Uni-
form Heat Recovery System that maintains the 
straightening iron at a 
constant temperature. 
There is a constant surge of power to ensure that 
heat is continuously delivered for optimal styling 
results, unlike other units which lose heat during 
use. This provides consistent styling power so 
 
Temp. Setting 
Hair Type
 Low 1-5 
Delicate, thin, easy-to-straighten hair
 Medium 6-11 
Average to thick or treated hair
 Med-High 12-20  Thick or wavy hair
 High 21-25 
Hard-to-straighten hair
Temperature Setting Guide
that every strand of your hair is set with the same 
level of heat and comes out the same way for a 
perfect fi nish.
REMOVABLE COMB
Your straightening iron includes a removable comb 
attachment. The hard bristle comb will help to 
provide tension and guide your hair as you use 
the straightening iron. To remove or attach the 
comb, turn unit off and allow unit to cool. Hold 
unit fi rmly with one hand; with your other hand, 
slide comb away from the iron to detach it. When 
attaching the comb, align it with the slot on the 
Removable Comb Attachment
06PC2056 CS25 IB.indd   1
06PC2056 CS25 IB.indd   1
2/21/07   2:20:46 PM
2/21/07   2:20:46 PM