Melissa 235-008 User Manual

4

5

4

5

INTRODUCTION
To get the best out of your new
apparatus, please read this user
guide carefully before using it for the
first time. We also recommend that 
you keep the instructions for future
reference, so that you can remind
yourself of the functions of your
apparatus.

SAFETY MEASURES
Normal use of the apparatus
•  Incorrect use of this apparatus

may cause personal injury and
damage.

•  Use for its intended purpose

only. The manufacturer is not
responsible for any injury or
damage resulting from incorrect
use or handling (see also
Guarantee Terms).

•  For connection to 20 V, 50 Hz

only.

•  Always turn the apparatus off

using the on/off button, and unplug
it, when it is not in use.

•  This symbol

means that the

appliance cannot be used in the
bath tub or near water, wash
basins, bowls or the like. Never try
to retrieve the apparatus if it falls
into water. First remove the plug
from the socket.

•  We recommend use of this

apparatus only if the installation
is protected by an HFI-/HPFI
relay. Please contact a qualified 
electrician if in doubt.

•  Please note that the apparatus will

remain hot for a while after you
switch it off. Always allow it to cool
completely before you put it away.

•  Always keep the apparatus at

a safe distance from flammable 
objects such as curtains,
tablecloths or the like.

•  Never leave unattended when in

use, and keep an eye on children.

•  Caution! The plates can get very

hot. They must not come into
contact with the skin, as this can
cause burns.

•  For domestic use only. Not for

outdoor or commercial use.

•  Do not cover.
•  Do not expose to direct sunlight.
•  Do not place or store near other

heat sources or in a damp
environment.

Cord, plug and mains socket
•  Keep cord away from hot objects

and open flame.

•  Check regularly that neither the

cord nor plug is damaged and do
not use if there is any damage, or
if it has been dropped on the floor, 
dropped in water or damaged in
any other way.

•  If the apparatus or plug is

damaged, it must be inspected
and if necessary, repaired by
an authorised repair engineer,
otherwise there is a risk of electric
shock. Never try to repair the
apparatus yourself.

•  Remove the plug from the socket

before cleaning.

•  Avoid pulling the cord when

removing the plug from the socket.
Instead, hold the plug.

•  Do not wind the cord around the

apparatus.

.  Power cord
2.  Lock button
.  Handle
4.  On/off button (not visible in the

picture)

5.  Temperature setting button
6.  Temperature indicator lights
7.  Ceramic plates (not visible on

picture)

8.  Steam aperture